NYLENE 200 P
TECHNICAL DATA SHEET

 
General Description    

  • Medium viscosity, general purpose nylon 6 molding resin which has been ground cryogenically to a very fine powder
  • Excellent melt stability, grease resistance, and toughness
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.13
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D 638
psi (MPa)
11,000 (76)
Elongation at Break
D 638
(%)
50
Flexural Modulus
D 790
psi (MPa)
370,000 (2,550)
Izod Impact at 23 °C
D 256
ft. lb./ in. J/m
0.7 (37)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D 648
°F (°C)
149 (65)
Melt Point
D 3418
°F °C
420 (215)
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/10/21