NYLENE 2407 HSSP
TECHNICAL DATA SHEET

 
General Description    

  • High viscosity nylon copolymer with high impact resistance and superior flexibility
  • Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black
  • 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Density
ISO 1183
1.07
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
ISO 527
MPa
45
Elongation @ Break
ISO 527
%
300
Flexural Modulus
ISO 978
MPa
800
Notched Izod @ 23 °C
ISO 180
J/m
20
Tensile Modulus
ISO 527
MPa
900
 
Thermal Properties Test Method Units
Dry as Molded
DTUL
ISO 75
°C
39
Melt Flow
ISO 1133
dg/min
3 avg
Melt Point
ISO 11357
deg;C
218
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22