NYLENE 5233 HS
TECHNICAL DATA SHEET

 
General Description    

  • 33% glass fiber reinforced heat stabilized nylon 6 injection molding resin.
  • High heat and chemical resistance inherent in nylon type resins, along with higher strength and stiffness due to glass fiber reinforcement.
  • Excellent surface appearance when processed in a warm mold.
  • Suitable for brackets, levers, handles, enclosures, and other applications where high physical properties combined with good appearance are required.
  • The ASTM line call out for this product is D4066 PA022G33
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.37
Mold Shrinkage
in/in
0.005 to 0.007
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
23,500 (162)
Elongation at Break
D638
%
3
Flexural Modulus
D790
psi MPa
1,350,000 (9,310)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
2.1 (112)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 KPa
D648
°F °C
410 (210)
Melt Point
D3418
°F °C
420 (215)
 
Approvals and Classifications Approval Rating
Automotive Approvals MS-DB41 CPN 3465
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer?s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22