NYLENE 601
TECHNICAL DATA SHEET

 
General Description    

  • Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing
  • Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance
  • Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.14
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
12,000
Elongation
D638
%
70
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
0.7
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
167
DTUL @ 66 psi/0.45 MPa
D648
°F °C
347
 
Approvals and Classifications Approval Rating
UL Flammability Rating 94V-2@0.058"
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23