NYLENE NX3411
TECHNICAL DATA SHEET

 
General Description    

  • Extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film
  • Excellent melt stability and good melt strength
  • Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors
  • Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact
Properties   

Physical Properties
Test Method
Units
DAM
Relative ViscosityD789 125
Specific Gravity
D792
1.12
 
Film Properties
Test Method
Units
DAM
**Elmendorf Tear
D789
gm/mil
56
**Tensile Yeild Strength
D638
psi
5,480
**Ultimate Tensile Strength
D882
psi
8,650
**ElongationD882%290
**Secant Modulus
D882
psi
94,600
 
ApprovalsRegulation 
FDA
21CFR 177.1500 for direct food contact
**Film Properties = Film Conditioned, and Tested in Transverse direction
Testing conducted on dry-as-molded specimens at 73°F                                                                                           

 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer’s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/12/15