NYLENE NX5703
TECHNICAL DATA SHEET

 
General Description    

  • Medium viscosity resin designed for extrusion applications requiring good flexibility and high strength
  • Ideally suited for mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread
  • Optimum processing conditions should provide a melt temperature of 450°F - 475°F at the die
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.17
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
10,200
Elongation
D638
%
140
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.0
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
144
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23