NYLENE PX1719
TECHNICAL DATA SHEET

 
General Description    

  • Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin
  • Can be processed by either injection molding or extrusion
  • Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.08
Mold Shrinkage
in/in
0.014
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
9,000 (62)
Elongation at Break
D638
%
250
Flexural Modulus
D790
psi MPa
95,000 (655)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
16.0 (855)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 455 kPa
D648
°F °C
285 (141)
Melt Point
D3418
°F °C
420 (215)
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23