NYLENE 5213-02
TECHNICAL DATA SHEET

 
General Description    

  • 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin
  • Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins
  • Improved strength and stiffness properties over unreinforced nylon
  • Suitable for uses such as handles and levers, brackets, housings and enclosures
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.21
Mold Shrinkage
in/in
0.005
 
Mechanical Properties
Test Method
Units
Dry as Molded
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
0.8 43
Elongation
D638
%
3
Flexural Modulus
D790
psi MPa
700,000 4828
Tensile Strength
D638
psi MPa
15,000 110
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
370 188
Melt Point
D3418
°F °C
420 215
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23