NYLENE 4114-HS
TECHNICAL DATA SHEET

 
General Description    

  • Heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility
  • Approved for automotive use under Ford Motor Company specification ESA-M4D379-B and ASTM D4066 PA0161
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.07
Mold Shrinkage
in/in
0.014
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
7,000 (48)
Elongation at Break
D638
%
60
Flexural Modulus
D790
psi MPa
248,000 (1,710)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
18.0 (960)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D648
°F °C
138 (59)
Melt Point
D3418
°F °C
500 (260)
 
Approvals and Classifications Approval Rating
Automotive Approvals Ford Motor Company ESA-M4D379-B and ASTM D4066 PA0161
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22