NYLENE 4114
TECHNICAL DATA SHEET

 
General Description    

  • Impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility
  • Recognized by Underwriters Laboratories and is approved for automotive use under Ford Motor Company specification ESA-M4D379-A and Chrysler Corporation specification MS-DB41 CPN 3466.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.08
Mold Shrinkage
in/in
0.014
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
7,200 (49)
Elongation at Break
D638
%
60
Flexural Modulus
D790
psi MPa
253,000 (1,740)
Notched Izod @ 23C
D256
ftlbf/in (J/m)
16.1 (860)
Notched Izod @ -40C
D 256
ftlbf/in (J/m)
3.4 (180)
Tensile Modulus
D638
psi MPa
270,000 (1860)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D648
°F °C
140 (60)
Melt Point
D3418
°F (°C )
497 (258)
 
Approvals and Classifications Approval Rating
Automotive Approvals Ford Motor Company & Chrysler Corporation specification ESA-M4D379-A & MS-DB41 CPN 3466
Natural @ 0.83 mm UL 94 HB
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2011/07/12