NYLENE 5130 PT15
TECHNICAL DATA SHEET

 
General Description    

Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using Nylene 5130 PT15 provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 PT15 is suitable for applications such as bushings and bearings, wear plates, and other parts where high strength with maximum wear resistance is required.

 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.51
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
18800 130
Flexural Modulus
D790
psi MPa
1,300,000 8965
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.3 70
 
Thermal Properties Test Method Units
Dry as Molded
Melt Point
D3418
°F °C
490 254
 
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer?s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22