NYLENE 5133 HS
TECHNICAL DATA SHEET

 
General Description    

  • 33% glass fiber reinforced, heat stabilized nylon 6/6.
  • Heat and chemical resistance inherent in nylon resins, while the glass fiber reinforcement gives greatly increased strength and stiffness.
  • Suitable for such applications as brackets, levers, covers, and other uses where strength and stiffness are required.
  • The ASTM line call out is D4066 PA012G33.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D 792
1.40
Mold Shrinkage
in/in
0.002
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi (MPa)
26,000 (184)
Flexural Modulus
D 790
psi (MPa)
1,240,000 (8,560)
Notched Izod @ 23 °C
D 256
ftlbf/in (J/m)
2.2 (116)
Tensile Modulus
D 638
psi (MPa)
1,360,000 (9410)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D 648
°F (°C)
482 (250)
Melt Point
D 3418
°F °C
503 (262)
 
Approvals and Classifications Approval Rating
Automotive Approvals ASTM D4066 PA0120 G33 ESE-M4D287-B ESE-M4D287-A (non-HS) MS-DB41 CPN 3969 (natural) GMP.PA66.013

 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer?s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22