NYLENE 5143 MS
TECHNICAL DATA SHEET

 
General Description    

  • Low wear 43% glass fiber reinforced nylon 6/6
  • Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material
  • Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.50
Mold Shrinkage
in/in
0.002
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
26,500 183
Elongation
D638
%
6
Flexural Modulus
D790
psi MPa
1,400,000 9655
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.5 80
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
460 238
Melt Point
D3418
°F °C
490 254
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22