NYLENE 5150 HS
TECHNICAL DATA SHEET

 
General Description    

  • 50% glass fiber reinforced, heat-stabilized nylon 6/6 injection molding resin
  • Formulated to exhibit maximum stiffness for the most demanding applications
  • Should be used in parts and tools specifically designed to accommodate such high glass fiber loadings, in order to maximize part performance
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.56
Mold Shrinkage
in/in
0.002
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
28,000 193
Elongation
D638
%
3
Flexural Modulus
D790
psi MPa
1,460,000 10070
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
3.0 160
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
480 249
Melt Point
D3418
°F °C
490 254
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer?s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22