NYLENE 7139 HS
TECHNICAL DATA SHEET

 
General Description    

  • Nylon 6/6 Homopolymer resin with increased wear resistance and lubricity
  • Suitable for injection molding applications
  • Has the inherent strength, lubricity, and chemical resistance common to nylon 6/6 homopolymer materials while exhibiting lower friction and wear characteristics
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.20
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
11,500 79
Elongation
D638
%
20
Flexural Modulus
D790
psi Mpa
415,000 2860
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.0 53
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
194 90
Melt Point
D3418
°F °C
490 254
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22