NYLENE 7215 HS
TECHNICAL DATA SHEET

 
General Description    

  • 40% glass fiber and mineral reinforced, heat stabilized nylon 6/6 injection molding resin
  • High strength and stiffness, and very good dimensional stability
  • Suitable for a wide variety of applications that require both high strength performance and excellent dimensional stability
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.40
Mold Shrinkage
in/in
0.006
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
17,000 117
Elongation
D638
%
5
Flexural Modulus
D790
psi MPa
1,000,000 6895
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
0.75 40
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
392 200
Melt Point
D3418
°F °C
482 250
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22