NYLENE 8005 HSL
TECHNICAL DATA SHEET

 
General Description    

  • Nylene 8005 or 8005 HSL is an Economy grade Impact Mofified PA66 molding resin
  • Has the high heat and chemical resistance characteristic of nylon 6/6 with a good impact
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
gm/cm
1.08
Mold Shrinkage
in/in
0.015
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
6500 45
Elongation
D638
%
80
Flexural Modulus
D790
psi MPa
225,000 1552
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
10 535
 
Thermal Properties Test Method Units
Dry as Molded
Melt Point
D3418
°F °C
500 260
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22