NYLENE 9110 G33
TECHNICAL DATA SHEET

 
General Description    

  • 33% glass fiber reinforced nylon 6/10 injection molding grade.
  • Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10
  • Suitable for pump housings, inlet housings, fittings, and other uses where moisture pickup may be a concern
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.32
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
21,000 145
Elongation
D638
%
25
Flexural Modulus
D790
psi MPa
1,100,000 7585
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
2.5 134
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
385 196
Melt Point
D3418
°F °C
418 214
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23