NYLENE CX3451
TECHNICAL DATA SHEET

 
General Description    

  • Injection molding grade copolymer nylon developed for high clarity
  • Excellent toughness, chemical resistance, and transparency
  • Suitable for uses such as reservoirs, filter bowls, sight windows, and other applications where clarity, toughness, and chemical resistance are required
  • Maximum clarity is achieved by using low mold temperatures
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.11
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
8500 59
Elongation
D638
%
350
Flexural Modulus
D790
psi Mpa
250,000 1725
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.5 80
 
Thermal Properties Test Method Units
Dry as Molded
Melt Point
D3418
°F °C
383 195
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer’s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23