NYLENE 4114-14
TECHNICAL DATA SHEET

 
General Description    

  • Nylene 4114-14 is an impact-modified, 14% glass fiber-reinforced nylon 6/6 molding resin with excellent impact strength.
  • Approved for automotive use under Ford Motor Company specification WSK-M4D590-A.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D 792
1.19
Mold Shrinkage
in/in
0.006
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D 638
psi MPa
11,400 (79)
Elongation @ Break
D 638
%
12
Flexural Modulus
D 790
psi MPa
500,000 (3,450)
Notched Izod @ 23C
D 256
ftlbÆ’/in (J/m)
1.3 (70)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D 648
°F (°C )
405 (207)
Melt Point
D 3418
°F (°C )
498 (259)
 
Approvals and Classifications Approval Rating
Automotive Approvals Ford Motor Company specification WSK-M4D590-A.
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2012/07/18