NORPEX PPE AX200 HI FLOW
TECHNICAL DATA SHEET

 
General Description    

  • Impact modified injection molding grade of PPE resin
  • Specially formulated for high impact resistance and high flow for large parts
  • Maintains a nominal 200 °F DTUL for medium heat use
  • Specifically developed for applications such as dunnage, material handling trays, and internal instrument panel hardware
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.04
Mold Shrinkage
in/in
.005 - .007
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
6300 (44)
Flexural Modulus
D790
psi Mpa
306,000 (2,110)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
5.5 (293)
Tensile Modulus
D 638
psi (MPa)
297,000 (2,050)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D648
°F °C
214 (101)
Melt Flow
D 1238
dg/min
1.2
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23