NORPEX PPE AX20MR FR
TECHNICAL DATA SHEET

 
General Description    

  • 20% flame-retardant mineral reinforced PPE injection molding resin
  • Has the inherent dimensional stability of PPE resins, while the addition of mineral reinforcement increases the strength and stiffness of finished parts
  • Suitable for such uses as enclosures, housings, panels, and other applications where dimensional control and flame retardancy are desired
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.24
Mold Shrinkage
in/in
0.005 - 0.007
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
10,750 (74)
Flexural Modulus
D790
psi Mpa
490,000 (3,380)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
4.0 (213)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
230 (110)
 
Approvals and Classifications Approval Rating
UL Flammability Rating 94V-0 @ 0.059”
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23