NAXEL PC40
TECHNICAL DATA SHEET

 
General Description    

  • General purpose Economy grade Polycarbonate
  • Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio
  • Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.20
Mold Shrinkage
in/in
0.006
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
8,750 60
Elongation
D638
%
88
Flexural Modulus
D790
psi Mpa
350,000 2415
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
15.0 802
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
260 127
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23