NAXEL PC43
TECHNICAL DATA SHEET

 
General Description    

  • General purpose, UV stabilized polycarbonate molding resin
  • Has the high impact resistance and heat resistance typical of polycarbonate, while adding a UV stabilizer package for improved weatherability
  • Suitable for enclosures and housings, trim panels, and consumer items that may experience increased light exposure
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.20
Mold Shrinkage
in/in
0.006
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
9,000 62
Elongation
D638
%
100
Flexural Modulus
D790
psi Mpa
325,000 2240
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
15.0 802
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
265 129
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23