NAXEL PC506
TECHNICAL DATA SHEET

 
General Description    

  • 30% glass fiber reinforced Polycarbonate
  • Has greatly improved stiffness over unreinforced PC grades
  • Suitable for applications such as housings, brackets, levers, and other uses that require toughness with high stiffness
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.43
Mold Shrinkage
in/in
0.002
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
17,000 117
Elongation
D638
%
3
Flexural Modulus
D790
psi Mpa
1,050,000 7240
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.8 96
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
285 141
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer’s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/23