494P IM BLK
TECHNICAL DATA SHEET

 
General Description    

  • Specially formulated nylon powder for the ROTOMOLDING process
  • For uses where HIGH IMPACT properties are required
  • Heat stabilized
  • Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying
  • Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.095
Mold Shrinkage
in./in.
0.015-0.020
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi (MPa)
7,700 (53)
Elongation
D638
%
150
Flexural Modulus
D790
psi (MPa)
265,000 (596)
Notched Izod Impact
D256
ft.lb./in.
No Break
Drop Weight Impact @ RT
ARM
Ft-lbs
125 (at 0.140”)
Drop Weight Impact @-20 C
ARM
Ft-lbs
100 (at 0.140”)
Drop Weight Impact @-40 C
ARM
Ft-lbs
80 (at 0.140”)
 
Thermal Properties Test Method Units
Dry as Molded
Melt Point
D3418
C
218
 
Testing conducted on dry-as-molded specimens at 73F
 
Notes



Issued: 2014/02/25