NYLENE 2408 HSSP
TECHNICAL DATA SHEET

 
General Description    

  • Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles
  • Especially useful for convoluted tubing
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Density
ISO 1183
g/cm 3
1.07
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
ISO 527
MPa
40
Elongation @ Break
ISO 527
%
125
Flexural Modulus
ISO 178
MPa
1080
Notched Izod @ 23 °C
ISO 180
kJ/m2
26
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1800 kPa
ISO 75
°C
42
Melt Point
ISO 11357
°C
246
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22