NYLENE 2401 HSSP BK
TECHNICAL DATA SHEET

 
General Description    

  • High viscosity nylon copolymer with enhanced impact and high flexibility
  • Optimized with good melt strength for high line speeds in thin wall sections
  • Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
Specific Gravity
D792
1.07
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
6,000 (41)
Elongation at Break
D638
%
125
Flexural Modulus
D790
psi MPa
160,000 (1,100)
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
2.8 (150)
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 1820 kPa
D648
°F °C
102 (39)
Melting Point
D 3418
°F °C
475 (246)
 
Testing conducted on dry-as-molded specimens at 73°F
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.



Issued: 2009/09/22