Nylene 494P

Rotational Molding Engineered, Heat Stabilized, Nylon 6 Compound

Nylene 6207HS BK

6207HS BK is specifically designed for extrusion but can also be used for blow molding and some molded parts High viscosity, 6/12 nylon with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

Nylene 2407 HSSP BK

High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

Nylene PAC900-120U

Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

Nylene 894 IM

Nylon 6/69 copolymer specially formulated for the ROTOMOLDING process. For uses where HIGH IMPACT properties are required. Heat stabilized for protection against elevated temperatures. Resistant to gasoline permeation. Chemical resistant to aromatic solvents. Permits a single-step process and a single layer material fuel tank.

Nylene PAC990-140U

Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

Nylene PAC900-120UNL

Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

Nylene CP41321U

Nylene® CP41321U is a nylon copolymer. Nylene CP41321U has many of the properties desirable in nylon such as toughness, chemical resistance and strength coupled with the advantages of a copolymer.   These advantages include high elongation, good clarity and flexibility, and lower processing temperatures. CP41321U is unextracted, utilizing the monomer as a plasticizer for increased flexibility.

Nylene 494P IM

Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. For uses where HIGH IMPACT properties are required. Specially formulated nylon powder for the ROTOMOLDING process. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures Excellent low temperature impact properties (Special impact modified products) Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. Higher impact at room and elevated temperatures Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive

Nylene 494P IM BLK

Specially formulated nylon powder for the ROTOMOLDING process. For uses where HIGH IMPACT properties are required. Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. Higher heat resistance and melting point. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures. Excellent low temperature impact properties (Special impact modified products). Higher impact at room and elevated temperatures. Permits a single step process and a single layer material fuel tank.  This will reduce the chances of failure and scrap, which makes it extremely cost competitive. Meets the strict CARB and EPA fuel permeation regulations.

United-states_flag_icon_round.svg Nylene USA
Corporate HQ/Facility
Kentucky Facility
canada-svgrepo-com.svg Nylene Canada
Ontario Facility
Canada Sales Office
International Flag Icon Round International
South America
China
Malaysia
Europe/Middle East
Skip to content