Nylon Technical Datasheet Finder | Nylene | Specialty Nylon Solutions

Product Name:

Description:

Resin:

Processing Method:

Grade Type/Application:

End Use/Properties:

Characteristic:

GroupID	Product Name	NyleneName	Description	Publish	Resin	NyleneID	ProcessingMethodsID	Processing Method	Grade Type/Application	End Use/Properties	Characteristic
2	Nylamid 1001	1001	Nylamid 1001 BK is a general purpose nylon 6,6 used for injection molding.	Public	Nylon 6/6	964	944	Injection Molding	Economy Grade	Unfilled
2	Nylene 132 HS	132 HS	Nylene 132 HS is a low viscosity, heat stabilized nylon 6,6 molding resin. Suitable for a variety of applications where heat, chemical, and wear resistance are required. Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding. This product is UL recognized.	Public	Nylon 6/6	750	602	Injection Molding	Prime Grade	Unfilled	Low RV
2	Nylene 132L	132L	Nylene 132L is a lubricated, low viscosity nylon 6/6 molding resin. Suitable for a variety of applications, such as clips, fasteners, and levers	Public	Nylon 6/6	59	689	Injection Molding	Prime Grade	Low Viscosity	Low Viscosity
2	Nylene 134	134	Nylene 134 is a low viscosity, nucleated nylon 6/6 molding resin useful for molding thin sections. Most useful for applications requiring greater stiffness and a higher heat distortion temperature. Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. Crystallization initiators provide fast molding cycles through rapid melt set-up.	Public	Nylon 6/6	780	659	Injection Molding	Prime Grade	Unfilled	Low RV
2	Nylene 134 HS	134 HS	Nylene 134 HS is a low viscosity, heat stabilized and nucleated nylon 6/6 molding resin.	Public	Nylon 6/6	779	658	Injection Molding	Prime Grade	Unfilled	Low RV
2	Nylene 134 HSL	134 HSL	Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required	Public	Nylon 6/6	60	738	Injection Molding	Prime Grade
2	Nylene 137 HS UV BK	137 HS UV BK	Heat-stabilized, UV stable nylon 6/6 homopolymer for use in injection molding processes Exhibits the same part toughness, wear resistance, heat and chemical resistance as standard nylon 6/6 grades while adding a UV resistance package to retain appearance under weathering conditions	Public	Nylon 6/6	61	739	Injection Molding	Prime Grade	Homopolymer	Homopolymer
1	Nylene 200 P	200 P	Medium viscosity, general purpose nylon 6 molding resin which has been ground cryogenically to a very fine powder Excellent melt stability, grease resistance, and toughness	Public	Nylon 6	62	1.091	Injection Molding	Prime Grade	Unfilled	Mid RV
1	Nylene 201	201	Nucleated nylon 6 molding resin designed for faster molding cycle times and lower part shrinkage	Public	Nylon 6	63	877	Injection Molding	Prime Grade
1	Nylene 201 MS3	201 MS3	Nylene 201 MS3 is a molybdenum disulfide lubricated nylon 6 molding resin with high ductility. Optimum processing conditions should provide a melt temperature of 430 – 480 ºF at the nozzle. The abrasion resistance of nylon is enhanced by the addition of molybdenum disulfide. Excellent wear properties	Public	Nylon 6	951	929	Injection Molding	Prime Grade	High Viscosity	Low Wear
1	Nylene 201 MS3	201 MS3	Nylene 201 MS3 is a molybdenum disulfide lubricated nylon 6 molding resin with high ductility. Optimum processing conditions should provide a melt temperature of 430 – 480 ºF at the nozzle. The abrasion resistance of nylon is enhanced by the addition of molybdenum disulfide. Excellent wear properties	Public	Nylon 6	951	1.079	Compounding	High RV – Compounding	High RV – Compounding	Low Wear
1	Nylamid 2010 BK	2010 BK	Nylamid 2010 BK is an economical, utility grade nylon 6 used for injection molding.	Public	Nylon 6	801	678	Injection Molding	Economy Grade	Unfilled
1	Nylene 201L	201L	Lubricated, nucleated nylon 6 molding resin designed for faster molding cycle times and lower part shrinkage	Public	Nylon 6	64	531	Injection Molding	Prime Grade
3	Nylene 203-MS3	203-MS3	Nylene® 201-MS3 is a nylon resin with special dry lubrication.	Public	Copolymers	862	802	Injection Molding	Specialty Grade	Unfilled
1	Nylene 204 HS	204 HS	Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon	Public	Nylon 6	65	541	Injection Molding	Prime Grade
1	Nylene 206	206	Medium viscosity, modified nylon 6 molding resin used extensively in injection molding applications and in applications requiring clear colors	Public	Nylon 6	735	542	Injection Molding	Prime Grade	Unfilled	Mid RV
1	Nylene 206 HS UV	206 HS UV	Nylene 206 HS UV is a heat and light stabilized medium viscosity nylon 6 molding resin used extensively in automotive applications.	Public	Nylon 6	849	769	Injection Molding	Prime Grade	Unfilled	Mid RV
1	Nylene 2401 HSSP BK	2401 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility. Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	67	1.030	Extrusion	Tubing & Profile	Smooth Tubing	High RV
1	Nylene 2401 HSSP BK	2401 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility. Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	67	1.033	Extrusion	Tubing & Profile	Pipe Profiles	High RV
1	Nylene 2401 HSSP BK	2401 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility. Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	67	1.034	Extrusion	Tubing & Profile	Rods & Other Profiles	High RV
1	Nylene 2401 HSSP BK	2401 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility. Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	67	1.059	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
1	Nylene 2401 HSSP BK	2401 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility. Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	67	1.060	Injection Molding	Prime Grade	Unfilled Impact Modified	High RV
1	Nylene 2403 HSSP BK	2403 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	747	543	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
1	Nylene 2403 HSSP BK	2403 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	747	1.019	Injection Molding	Prime Grade	Unfilled	High RV
1	Nylene 2407 HSSP	2407 HSSP	High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.	Public	Nylon 6	72	545	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
1	Nylene 2407 HSSP	2407 HSSP	High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.	Public	Nylon 6	72	1.070	Injection Molding	Prime Grade	Unfilled Impact Modified	High RV
18	Nylene 2407 HSSP BK	2407 HSSP BK	High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Nylon 6	748	639	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
18	Nylene 2407HSSP	2407HSSP	High viscosity nylon copolymer with high impact resistance and superior flexibility One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black	Public	Nylon 6	981	1.043	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
18	Nylene 2407HSSP	2407HSSP	High viscosity nylon copolymer with high impact resistance and superior flexibility One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts. Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black	Public	Nylon 6	981	1.044	Extrusion	Tubing & Profile	Smooth Tubing	High RV
1	Nylene 2408 HSSP	2408 HSSP	Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.	Public	Nylon 6	74	399	Extrusion	Tubing & Profile	Convoluted Tubing	Mid RV
1	Nylene 2408 HSSP	2408 HSSP	Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.	Public	Nylon 6	74	1.089	Injection Molding	Prime Grade	Unfilled Impact Modified	Mid RV
18	Nylene 2408 HSSP BK	2408 HSSP BK	Nylene 2408 HSSP BK is a modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles. Especially useful for convoluted tubing.	Public	Nylon 6	76	400	Extrusion	Tubing & Profile	Convoluted Tubing	Mid RV
18	Nylene 2408 HSSP UV	2408 HSSP UV	Nylene 2408 HSSP UV is a modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles. Especially useful for convoluted tubing. Resistance to UV light.	Public	Nylon 6	977	957	Extrusion	Tubing & Profile	Convoluted Tubing	UV Resistant
18	Nylene 2409 HSSP BK	2409 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.	Public	Nylon 6	77	827	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
18	Nylene 2409 HSSP BK	2409 HSSP BK	High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.	Public	Nylon 6	77	828	Injection Molding	Prime Grade	Unfilled Impact Modified
3	Nylene 2415 HSSP BK	2415 HSSP BK	High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections Optimized with good melt strength for high line speeds in thin wall sections. Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.	Public	Copolymers	749	546	Extrusion	Tubing & Profile	Convoluted Tubing	High RV
18	Nylene 2433 HSSP BK	2433 HSSP BK	Modified nylon 6 with very good physical properties and excellent extrusion characteristics.	Public	Nylon 6	82	547	Extrusion	Tubing & Profile	Convoluted Tubing
18	Nylene 2433 HSSP BK	2433 HSSP BK	Modified nylon 6 with very good physical properties and excellent extrusion characteristics.	Public	Nylon 6	82	829	Injection Molding	Prime Grade	Unfilled
1	Nylene 307 HS	307 HS	A low viscosity, heat stabilized nylon 6 molding resin.	Public	Nylon 6	83	830	Injection Molding	Prime Grade	Unfilled	Low RV
2	Nylene 311	311	Nylene 311 is an impact-modified nylon 6/6 molding resin with increased flexibility.	Public	Nylon 6/6	84	662	Injection Molding	Prime Grade
2	Nylene 311 HS	311 HS	Exhibits an improved impact resistance and flexibility over unmodified nylons Impact-modified nylon 6,6 molding resin with increased flexibility Retains the excellent chemical and heat resistance typical of all nylon products	Public	Nylon 6/6	85	627	Injection Molding	Prime Grade
2	Nylene 311 HS BK	311 HS BK	Nylene 311 HS BK is an impact-modified, heat-stabilized nylon 6/6 molding resin with increased flexibility.	Public	Nylon 6/6	804	685	Injection Molding	Prime Grade	Unfilled Impact Modified
2	Nylene 311-02	311-02	Nylamid 311-02 is an economical, impact-modified nylon 6/6 molding resin with increased flexibility for injection molded parts.	Public	Nylon 6/6	975	955	Injection Molding	Economy Grade	Unfilled Impact Modified
2	Nylene 311-02 HS	311-02 HS	Nylamid 311-02 is an economical, impact-modified, compounded, nylon 6/6 molding resin with increased flexibility for injection molded parts.	Public	Nylon 6/6	968	948	Injection Molding	Economy Grade	Unfilled Impact Modified
2	Nylamid 311-02 HS BK SP-LL	311-02 HS BK SP-LL	Nylamid 311-02 HS BK SP-LL is an economical, impact-modified nylon 6/6 molding resin with increased flexibility for injection molded parts.	Public	Nylon 6/6	814	698	Injection Molding	Specialty Grade	Unfilled Impact Modified	Economy
2	Nylamid 311-04 HS BK	311-04 HS BK	Nylamid 311-04 HS BK is an economical, heat stabilized, impact-modified nylon 6/6 molding resin with increased flexibility for injection molded parts.	Public	Nylon 6/6	874	818	Injection Molding	Economy Grade	Unfilled	Impact Modified
1	Nylene 321 HS	321 HS	Impact modified, heat stabilized nylon 6 injection molding resin. Inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where some impact may occur during service Suitable for such applications and uses which require higher toughness and flexibility	Public	Nylon 6	86	549	Injection Molding	Prime Grade
1	Nylene 323	323	Flexurally modified nylon 6 molding resin with excellent impact resistance	Public	Nylon 6	87	401	Extrusion	Tubing & Profile	Convoluted Tubing
1	Nylene 323 HS	323 HS	Heat stabilized nylon 6 copolymer for both extrusion and injection molding Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins	Public	Nylon 6	88	550	Extrusion	Tubing & Profile	Convoluted Tubing
18	Nylene 400	400	Specially polymerized, low viscosity nylon 6 resin. Designed specifically for use in manufacturing concentrates and other compounding uses. The low viscosity of Nylene 400 aids in dispersion and mixing of concentrates and pigments, and can be used as a carrier for both type 6 and type 6/6 nylons	Public	Nylon 6	89	551	Compounding	Low RV – Compounding	Low RV – Compounding	Concentrates – General Purpose
1	Nylene 401	401	General purpose un-reinforced nylon 6 injection molding resin High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding	Public	Nylon 6	91	403	Injection Molding	Prime Grade	General Purpose	Unreinforced
1	Nylene 401 MDS	401 MDS	Nylene 401 MDS is an injection molding grade resin containing molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon is enhanced by the addition of molydisulfide. Optimum processing conditions should provide a melt temperature of 470 – 510ºF at the nozzle. Excellent wear properties	Public	Nylon 6	864	804	Injection Molding	Prime Grade
1	Nylene 401F	401F	Food-contact FDA compliant un-reinforced nylon 6 injection molding resin Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding High flow characteristics at minimal processing temperatures	Public	Nylon 6	92	405	Injection Molding	Prime Grade	High Flow	Unreinforced
1	Nylene 401FR	401FR	General purpose, un-reinforced, nylon 6 injection molding resin with FLAME RETARDANT. High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding	Public	Nylon 6	1.082	1.130	Injection Molding	Prime Grade	General Purpose	Unreinforced
1	Nylene 402	402	Offers outstanding toughness and flexibility. Exhibits excellent flow properties at temperature and pressure settings suitable for a wide variety of general purpose molding applications Optimum processing conditions should provide a melt temperature of 450°F-470°F at nozzle	Public	Nylon 6	94	554	Injection Molding	Prime Grade
1	Nylene 404HSL UV BK	404HSL UV BK	General purpose un-reinforced, heat stabilized nylon 6 injection molding resin with Carbon Black added for UV stabilization. Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding. High flow characteristics at minimal processing temperatures.	Public	Nylon 6	95	528	Injection Molding	Specialty Grade
1	Nylene 406	406	General purpose, fast cycling nylon 6 molding resin Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon	Public	Nylon 6	482	556	Injection Molding	Prime Grade
1	Nylene 406F	406F	General purpose, fast cycling nylon 6 molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding Parts molded from Nylene 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon	Public	Nylon 6	98	407	Injection Molding	Prime Grade	Fast Cycling	Unreinforced
1	Nylene 409	409	Heat stabilized version of 406 which is a general purpose, fast cycling nylon 6 molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation Parts molded have better dimensional stability at moisture equilibrium than partsm olded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle	Public	Nylon 6	99	530	Injection Molding	Prime Grade
2	Nylene 411	411	Nylene 411 is an impact-modified nylon 6/6 molding resin with medium impact strength.	Public	Nylon 6/6	372	740	Injection Molding	Prime Grade	Unfilled Impact Modified
2	Nylene 411 HS	411 HS	Nylene 411 HS is a heat stabilized, impact-modified nylon 6/6 molding resin with medium impact strength.	Public	Nylon 6/6	100	761	Injection Molding	Prime Grade
2	Nylene 4114	4114	Impact-modified nylon 6,6 compounded copolymer, high melt point and increased flexibility.	Public	Nylon 6/6	101	408	Injection Molding	Prime Grade	Compounded	Impact Modified
2	Nylene 4114 BK SP DSD	4114 BK SP DSD	Nylene 4114 BK SP DSD is an impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility. Good flow characteristics	Public	Nylon 6/6	991	1.085	Injection Molding	Prime Grade	Unfilled Impact Modified
2	Nylene 4114 FD	4114 FD	Impact-modified nylon 6,6 compounded copolymer, high melt point and increased flexibility.	Public	Nylon 6/6	1.107	1.185	Injection Molding	Prime Grade	Compounded	Impact Modified
2	Nylene 4114 HS	4114 HS	Nylene 4114 HS is a heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.	Public	Nylon 6/6	102	628	Injection Molding	Prime Grade
2	Nylene 4114 HS BK	4114 HS BK	Nylene 4114 HS BK is a heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.	Public	Nylon 6/6	878	823	Injection Molding	Prime Grade	Unfilled Impact Modified	Impact Modified
2	Nylene 4114 HS BK ISO	4114 HS BK ISO	Nylene 4114 HS BK is a heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.	Public	Nylon 6/6	877	822	Injection Molding	Prime Grade
2	Nylene 4114 SP PMT BK	4114 SP PMT BK	Good flow characteristics Nylene 4114 BK SP DSD is an impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.	Public	Nylon 6/6	992	1.086	Injection Molding	Prime Grade	Unfilled Impact Modified
2	Nylene 4114 UV	4114 UV	Impact-modified nylon 6,6 compounded copolymer, high melt point and increased flexibility. Light stabilized for UV protection	Public	Nylon 6/6	961	941	Injection Molding	Prime Grade
2	Nylene 4114-14	4114-14	Nylene 4114-14 is an impact-modified molding resin with excellent impact strength.	Public	Nylon 6/6	371	421	Injection Molding	Prime Grade	Reinforced Impact Modified	14% GF
2	Nylene 4114-14 GL	4114-14 GL	Nylene 4114-14 GL is an impact-modified molding resin with excellent impact strength.	Public	Nylon 6/6	370	1.096	Injection Molding	Prime Grade	Reinforced
2	Nylene 4114-14 HSL	4114-14 HSL	Nylene 4114-14 HSL is a glass fiber reinforced, impact modified, heat stabilized nylon 6/6. Nylene 4114-14 HSL has improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions.	Public	Nylon 6/6	103	12	Injection Molding	Prime Grade	Impact Modified	14% GF
2	Nylene 4114-25 GF HRV	4114-25 GF HRV	Nylene 4114-25 GF HRV is a compounded, 25% glass fiber-reinforced nylon 6/6 profile extrusion grade with excellent thermal stability.	Public	Nylon 6/6	1.095	1.168	Extrusion	Tubing & Profile	Pipe Profiles
2	Nylene 4114-25 GF HRV	4114-25 GF HRV	Nylene 4114-25 GF HRV is a compounded, 25% glass fiber-reinforced nylon 6/6 profile extrusion grade with excellent thermal stability.	Public	Nylon 6/6	1.095	1.169	Extrusion	Tubing & Profile	Rods and Other Profiles
2	Nylene 4114-33 HS	4114-33 HS	Nylene 4114-33 GL HS is a compounded, heat-stabilized, impact-modified, 33% glass fiber-reinforced nylon 6/6 molding resin with excellent impact strength.	Public	Nylon 6/6	971	951	Injection Molding	Prime Grade
2	Nylene 4114-33 HSL	4114-33 HSL	Nylene 4114-33 HSL is a 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6,6. Nylene 4114-33 HSL is useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments.	Public	Nylon 6/6	104	641	Injection Molding	Prime Grade
2	Nylene 4120	4120	Nylene 4120 is an impact-modified nylon 6/6 molding resin with high impact strength. While free of silicones, it possesses very low wear properties.	Public	Nylon 6/6	373	423	Injection Molding	Prime Grade
2	Nylene 4120 HS	4120 HS	Nylene 4120 HS is an impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength. Free of silicones, it possesses very low wear properties.	Public	Nylon 6/6	105	422	Injection Molding	Prime Grade	Reinforced	20% GF
2	Nylene 4121 HS	4121 HS	Nylene 4121 HS is an impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties.	Public	Nylon 6/6	106	762	Injection Molding	Prime Grade
1	Nylene 421 HS	421 HS	Impact modified, heat stabilized nylon 6 injection molding resin. Nylene 421 HS has the inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where impact may occur during service Suitable for applications and uses which require higher toughness and flexibility	Public	Nylon 6	107	557	Injection Molding	Prime Grade
1	Nylene 4214	4214	Impact-modified with excellent molding characteristics and very good physical properties	Public	Nylon 6	108	558	Injection Molding	Prime Grade
1	Nylene 4214 -14 BK	4214 -14 BK	Nylene 4214-14 BK is a 14% glass fiber-reinforced, impact-modified nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	785	665	Injection Molding	Prime Grade	Reinforced	14% GF
1	Nylene 4214-15 HS	4214-15 HS	Glass fiber reinforced, impact modified, heat stabilized nylon 6 Suitable for applications which require this unique blend of properties Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions	Public	Nylon 6	109	559	Injection Molding	Prime Grade
1	Nylene 4214-33 HS	4214-33 HS	Glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments	Public	Nylon 6	110	560	Injection Molding	Prime Grade	Reinforced Impact Modified	33% GF
1	Nylene 4214-40 HS	4214-40 HS	Nylene 4214-40 HS is a 40% glass fiber-reinforced, heat-stabilized and impactmodified nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	824	741	Injection Molding	Prime Grade	Reinforced	40% GF
1	Nylene 4580 HS BK	4580 HS BK	Nylene 4580 HS BK is a heat-stabilized nylon 6 molding resin	Public	Nylon 6	911	880	Injection Molding	Prime Grade	Unfilled
2	Nylamid 4628 HS BK	4628 HS BK	Nylamid 4628 HS BK is a pigmented, heat-stabilized, impact-modified,mineral-filled nylon 6/6. This product has good properties and is a good alternative for applications where cost and performance are equally important.	Public	Nylon 6/6	1.001	995	Injection Molding	Prime Grade	Reinforced Impact Modified	28% MIN
3	Nylene 494 BLK	494 BLK	Dried to less than 0.20% moisture and packaged in foil-lined gaylords or bags to eliminate the need for pre-drying Heat stabilized Specially formulated nylon for the ROTOMOLDING process to reduce cost vs. using 100% powder. For rotomolding, this product must be used in conjunction with Nylene® 494P BLK powder to achieve good part quality. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures Custom colors on demand Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. Higher impact at room and elevated temperatures Meets the strict CARB and EPA fuel permeation regulations Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive	Public	Copolymers	935	909	Rotational Molding	Specialty Grade	Specialty Nylon	Pellets
3	Nylene 494P	494P	Nylene powders for rotational molding are heat stabilized nylon 6 materials specially formulated for the rotational molding process. Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures Higher impact at room and elevated temperatures Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive	Public	Copolymers	115	387	Rotational Molding	Specialty Grade	Specialty Nylon	Powder
3	Nylene 494P BLK	494P BLK	Specially formulated, heat stabilized, nylon powder for the ROTOMOLDING process Chemical resistance to aromatic solvents, etc. especially at elevated temperatures Custom colors on demand Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. Higher impact at room and elevated temperatures Meets the strict CARB and EPA fuel permeation regulations Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive	Public	Copolymers	116	667	Rotational Molding	Specialty Grade	Specialty Nylon	Pellet
3	Nylene 494P IM	494P IM	Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. For uses where HIGH IMPACT properties are required. Specially formulated nylon powder for the ROTOMOLDING process. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures Excellent low temperature impact properties (Special impact modified products) Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. Higher impact at room and elevated temperatures Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive	Public	Copolymers	805	686	Rotational Molding	Specialty Grade	Impact Modified	Single Step/Layer
3	Nylene 494P IM BLK	494P IM BLK	Specially formulated nylon powder for the ROTOMOLDING process. For uses where HIGH IMPACT properties are required. Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. Higher heat resistance and melting point. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures. Excellent low temperature impact properties (Special impact modified products). Higher impact at room and elevated temperatures. Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive. Meets the strict CARB and EPA fuel permeation regulations.	Public	Copolymers	243	380	Rotational Molding	Specialty Grade		High Impact
3	Nylene 494P IM UV	494P IM UV	10 year UV stabilization package added for outdoor exposure protection. Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. For uses where HIGH IMPACT properties are required. Specially formulated nylon powder for the ROTOMOLDING process. Chemical resistance to aromatic solvents, etc. especially at elevated temperatures. UV resistance package increases end-use product life, protects against premature color fading, and retains appearance under weathering conditions for longer periods. Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive. Meets the strict CARB and EPA fuel permeation regulations. Higher impact at room and elevated temperatures. Higher heat resistance and melting point. Excellent low temperature impact properties (Special impact modified products).	Public	Copolymers	884	841	Rotational Molding	Specialty Grade	High Impact	Natural Powder
2	Nylene 5105	5105	Nylene 5105 HS is a 5% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	834	749	Injection Molding	Prime Grade	Reinforced	5% GF
2	Nylene 5105 HS	5105 HS	Nylene 5135 HS is a heat stabilized, 5% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. Suitable for applications where strength and stiffness are required. Exhibits an improved impact resistance and flexibility over unmodified nylons	Public	Nylon 6/6	117	705	Injection Molding	Prime Grade
2	Nylene 5110 HS	5110 HS	Nylene 5110 HS is a 10% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	835	750	Injection Molding	Prime Grade	Reinforced	10% GF
2	Nylene 5113	5113	Nylene 5113 is a 13% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	795	671	Injection Molding	Prime Grade	Reinforced	13% GF
2	Nylene 5113 HS	5113 HS	Heat stabilized, Glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness	Public	Nylon 6/6	118	525	Injection Molding	Prime Grade		13% GF
2	Nylene 5113 HS BK	5113 HS BK	Heat stabilized, Glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness	Public	Nylon 6/6	758	633	Injection Molding	Prime Grade	Reinforced	13% GF
2	Nylamid 5113-02 HS	5113-02 HS	Nylamid 5113-02 HS is a heat stabilized, 13% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.	Public	Nylon 6/6	797	673	Injection Molding	Economy Grade	Reinforced	13% GF
2	Nylene 5113-02 HS BK	5113-02 HS BK	Nylamid 5133-02 HS BK is a heat stabilized, 13% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.	Public	Nylon 6/6	796	672	Injection Molding	Economy Grade	Reinforced	13% GF
2	Nylamid 5113-04 BK	5113-04 BK	Nylamid 5113-04 BK is an economical, 13% glass fiber-reinforced nylon 6/6 used for injection molding.	Public	Nylon 6/6	798	674	Injection Molding	Utility Grade	Reinforced	13% GF
2	Nylene 5115 HS	5115 HS	Nylene 5115 HS is a 15% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	836	751	Injection Molding	Prime Grade	Reinforced	15% GF
2	Nylene 5120 HB Cool Grey	5120 HB Cool Grey	Nylene 5120 HB Cool Grey is a 20% glass fiber-reinforced nylon 6/6 featuring flame retardant, high tensile strength and stiffness. This product is recognized by Underwriters Laboratories.	Public	Nylon 6/6	886	844	Injection Molding	Prime Grade	Reinforced	20% GF
2	Nylene 5120 HS	5120 HS	Nylene 5120 HS is a 20% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	837	752	Injection Molding	Prime Grade	Reinforced	20% GF
2	Nylene 5125 HS	5125 HS	Nylene 5125 HS is a 25% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	838	753	Injection Molding	Prime Grade	Reinforced	25% GF
2	Nylene 5130 HR BK	5130 HR BK	Nylene 5130 HR BK is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. Product is specially formulated to improve resistance to glycol, such as automotive engine cooling fluid. Excellent thermal and mechanical properties to increase the lifetime of parts in constant contact with under the hood chemicals.	Public	Nylon 6/6	847	768	Injection Molding	Prime Grade	Reinforced	30% GF
2	Nylene 5130 HR NAT	5130 HR NAT	Nylene 5130 HR NAT is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. Nylene 5130 HR NAT is specially stabilized to improve its resistance automotive cooling liquids. Excellent thermal and mechanical properties to increase the lifetime of parts that are in constant contact with automotive chemicals.	Public	Nylon 6/6	846	766	Injection Molding	Prime Grade	Reinforced	30% GF
2	Nylene 5130 HS	5130 HS	Nylene 5130 HS is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	839	754	Injection Molding	Prime Grade	Reinforced
2	Nylene 5130 MS	5130 MS	Nylene 5130 MS is a low wear 30% glass fiber reinforced nylon 6,6 using molybdenum disulphide as a lubricant. This material provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 MS is suitable for applications where wear may be an issue.	Public	Nylon 6/6	119	702	Injection Molding	Prime Grade		30% GF
2	Nylene 5130 PT15	5130 PT15	Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using 15% PTFE as a lubricant. This material provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 PT15 is suitable for applications where high strength with maximum wear resistance is required.	Public	Nylon 6/6	120	701	Injection Molding	Specialty Grade		30% GF
2	Nylene 5130 SP-CP	5130 SP-CP	Nylene 5130 SP-CP is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	880	837	Injection Molding	Specialty Grade	Reinforced	30% GF
2	Nylene 5133	5133	Nylene 5133 is a glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	341	417	Injection Molding	Prime Grade	Reinforced	33% GF
2	Nylene 5133 HRL	5133 HRL	Nylene 5133 HRL is 33% glass fiber-reinforced nylon 6/6 with improved hydrolysis resistance, featuring high tensile strength and stiffness.	Public	Nylon 6/6	870	813	Injection Molding	Specialty Grade	Reinforced	33% GF
2	Nylene 5133 HS	5133 HS	Nylene 5133 HS is a heat stabilized, 33% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. Suitable for applications where strength and stiffness are required. Exhibits an improved impact resistance and flexibility over unmodified nylons	Public	Nylon 6/6	121	409	Injection Molding	Prime Grade	Reinforced	33% GF
2	Nylamid 5133-02	5133-02	Nylamid 5133-02 is a 33% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.	Public	Nylon 6/6	122	636	Injection Molding	Economy Grade	Reinforced	33% GF
2	Nylamid 5133-02 HS	5133-02 HS	Nylamid 5133-02 HS is a 33% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.	Public	Nylon 6/6	766	640	Injection Molding	Economy Grade	Reinforced	33% GF
2	Nylamid 5133-04 BK	5133-04 BK	Nylamid 5133-04 BK is an economical, 33% glass fiber-reinforced nylon 6/6 used for injection molding.	Public	Nylon 6/6	771	650	Injection Molding	Utility Grade	Reinforced	33% GF
2	Nylamid 5133-04 HS	5133-04 HS	Nylamid 5133-04 HS is an economical, 33% glass fiber-reinforced nylon 6/6 used for injection molding.	Public	Nylon 6/6	782	661	Injection Molding	Utility Grade	Reinforced	33% GF
2	Nylene 5135 HS	5135 HS	Nylene 5135 HS is a 35% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	840	755	Injection Molding	Prime Grade	Reinforced	35% GF
2	Nylene 5140 HS	5140 HS	Nylene 5140 HS is a 40% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	841	756	Injection Molding	Prime Grade	Reinforced	40% GF
2	Nylene 5143	5143	Nylene 5133 is a glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	123	638	Injection Molding	Prime Grade
2	Nylene 5143 MS	5143 MS	Low wear 43% glass fiber reinforced nylon 6,6. Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material, Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue.	Public	Nylon 6/6	124	763	Injection Molding	Prime Grade	Reinforced	43% MIN
2	Nylene 5145 HS	5145 HS	Nylene 5145 HS is a 45% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	842	757	Injection Molding	Prime Grade	Reinforced	45% GF
2	Nylene 5150 HS	5150 HS	Glass fiber reinforced, heat-stabilized nylon 6/6 injection molding resin Formulated to exhibit maximum stiffness for the most demanding applications Should be used in parts and tools specifically designed to accommodate such high glass fiber loadings, in order to maximize part performance	Public	Nylon 6/6	125	632	Injection Molding	Prime Grade	Reinforced	50% GF
2	Nylene 5150 HS (ISO)	5150 HS (ISO)	Formulated to exhibit maximum stiffness for the most demanding applications Glass fiber reinforced, heat-stabilized nylon 6/6 injection molding resin Should be used in parts and tools specifically designed to accommodate such high glass fiber loadings, in order to maximize part performance	Public	Nylon 6/6	843	758	Injection Molding	Prime Grade	Reinforced	50% GF
2	Nylene 5160 HS BK	5160 HS BK	Nylene 5160 HS BK is a 60% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.	Public	Nylon 6/6	960	940	Injection Molding	Prime Grade	Reinforced	60% GF
1	Nylene 5213	5213	Nylene 5213 is a glass fiber-reinforced nylon featuring high tensile strength and stiffness.	Public	Nylon 6	775	653	Injection Molding	Prime Grade		13% GF
1	Nylene 5213 HS	5213 HS	Glass fiber reinforced, heat-stabilized nylon 6 Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon	Public	Nylon 6	126	565	Injection Molding	Prime Grade	Reinforced	13% GF
1	Nylene 5213-02	5213-02	Glass fiber reinforced nylon 6 Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon	Public	Nylon 6	127	566	Injection Molding	Economy Grade	Improved Impact	13% GF
1	Nylene 5215	5215	Nylene 5215 is a glass fiber-reinforced nylon featuring high tensile strength and stiffness.	Public	Nylon 6	865	805	Injection Molding	Prime Grade	Reinforced	15% GF
1	Nylamid 5220-02 BK	5220-02 BK	Nylamid 5220-02 BK is a 20% glass fiber-reinforced nylon 6 featuring good tensile strength, stiffness and impact resistance.	Public	Nylon 6	957	935	Injection Molding	Economy Grade	Reinforced	20% MIN
1	Nylene 5222 BK TF	5222 BK TF	Nylene 5222 BK TF is a black, 22% glass fiber-reinforced nylon 6 featuring high tensile strength and toughness.	Public	Nylon 6	952	931	Injection Molding	Specialty Grade	Reinforced	22% GF
1	Nylene 5225	5225	Nylene 5225 is a 25% glass fiber-reinforced nylon 6 injection molding resin.	Public	Nylon 6	806	687	Injection Molding	Prime Grade	Reinforced	15% GF
1	Nylene 5225 HSBK	5225 HSBK	Nylene 5225 is a 25% glass fiber-reinforced, heat stabilized nylon 6 injection molding resin.	Public	Nylon 6	910	879	Injection Molding	Prime Grade	Reinforced	25% GF
1	Nylene 5225-04 BK	5225-04 BK	Nylene 5225-04 is a 25% glass fiber-reinforced, heat stabilized nylon 6 injection molding resin.	Public	Nylon 6	1.096	1.170	Injection Molding	Economy Grade	Reinforced	25% GF
1	Nylene 5230	5230	Nylene 5230 is a 30% glass fiber-reinforced nylon 6 featuring high tensile strength, stiffness and impact resistance.	Public	Nylon 6	297	820	Injection Molding	Prime Grade	Reinforced	30% GF
1	Nylene 5230 HS BK	5230 HS BK	Nylene® 5230 HS BK is a 30% glass fiber-reinforced, heat-stabilized nylon 6 injection molding resin.	Public	Nylon 6	831	745	Injection Molding	Prime Grade	Reinforced	30% GF
1	Nylene 5230-21 HS BK	5230-21 HS BK	Nylene 5230-21 HS BK is a 20% glass bead, 10% glass fiber-reinforced, heat stabilized, injection molding resin. Nylene 5230-21 HS BK is suitable for applications where dimensional stability is important. This product uses glass fiber reinforcement to achieve improved strength and stiffness along glass beads for increased flatness and dimensional stability.	Public	Nylon 6	876	821	Injection Molding	Prime Grade	Reinforced	10% GF / 20% GB
1	Nylene 5233	5233	Nylene 5233 is a glass fiber-reinforced nylon featuring high tensile strength, stiffness and impact resistance	Public	Nylon 6	348	418	Injection Molding	Prime Grade	Reinforced	33% GF
1	Nylene 5233 BK	5233 BK	Nylene 5233 BK is a glass fiber-reinforced nylon featuring high tensile strength, stiffness and impact resistance	Public	Nylon 6	1.067	1.107	Injection Molding
1	Nylene 5233 HS	5233 HS	Glass fiber reinforced heat stabilized nylon 6 injection molding resin. High heat and chemical resistance inherent in nylon type resins, along with higher strength and stiffness due to glass fiber reinforcement. Excellent surface appearance when processed in a warm mold.	Public	Nylon 6	128	567	Injection Molding	Prime Grade	Reinforced	33% GF
1	Nylene 5233 NAT	5233 NAT	Nylene 5233 is a glass fiber-reinforced nylon featuring high tensile strength, stiffness and impact resistance	Public	Nylon 6	994	1.090	Injection Molding	Prime Grade	Reinforced	15% GF
1	Nylene 5233-02	5233-02	Glass fiber reinforced nylon 6 featuring high tensile strength, stiffness and impact resistance	Public	Nylon 6	129	568	Injection Molding	Economy Grade	Reinforced	33% GF
1	Nylene 5233-04 HS	5233-04 HS	Nylene 5233-04 is a utility grade, 33% glass fiber filled nylon 6.	Public	Nylon 6	751	603	Injection Molding	Utility Grade	Reinforced	33% GF
1	Nylene 5240 HS	5240 HS	Glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Suitable for end uses requiring high stiffness along with good appearance The nylon 6 base resin provides excellent surface appearance Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness	Public	Nylon 6	852	787	Injection Molding	Prime Grade	Reinforced	40% GF
1	Nylene 5243 HS	5243 HS	Glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Suitable for end uses requiring high stiffness along with good appearance Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin provides excellent surface appearance	Public	Nylon 6	130	569	Injection Molding	Prime Grade
1	Nylene 5250 HS	5250 HS	Glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Suitable for end uses where maximum strength and stiffness are required Specifically designed for maximum strength and stiffness while maintaining the heat and chemical resistance typical of nylon 6 resins	Public	Nylon 6	131	570	Injection Molding	Prime Grade	Reinforced	50% GF
2	Nylamid 5305 BK	5305 BK	Nylamid 5305 BK is an economical, 35% glass fiber-reinforced nylon 6,6 used for injection molding.	Public	Nylon 6/6	875	819	Injection Molding	Prime Grade	Reinforced	3535% GF
18	Nylene 600	600	General purpose, medium viscosity, extrusion grade resin Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die	Public	Nylon 6	132	572	Extrusion	Tubing & Profile	Centrifugal Casting	Mid RV
18	Nylene 600	600	General purpose, medium viscosity, extrusion grade resin Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die	Public	Nylon 6	132	960	Extrusion	Tubing & Profile	Pipe Profiles	Mid RV
18	Nylene 600	600	General purpose, medium viscosity, extrusion grade resin Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die	Public	Nylon 6	132	961	Compounding	Mid RV – Compounding	Mid RV – Compounding	General Purpose
18	Nylene 600	600	General purpose, medium viscosity, extrusion grade resin Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die	Public	Nylon 6	132	962	Extrusion	Wire & Cable	Wire & Cable Coating	Mid RV
18	Nylene 600	600	General purpose, medium viscosity, extrusion grade resin Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die	Public	Nylon 6	132	963	Extrusion	Tubing & Profile	Smooth Tubing	Mid RV
18	Nylene 601	601	Heat stabilized version of Nylene 600 which is a general purpose, medium viscosity, extrusion grade resin Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die Applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance	Public	Nylon 6	133	573	Extrusion	Film	Centrifugal Casting	Mid RV
18	Nylene 601	601	Heat stabilized version of Nylene 600 which is a general purpose, medium viscosity, extrusion grade resin Optimum processing conditions should provide a melt temperature of 481°F – 500°F at the die Applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance	Public	Nylon 6	133	574	Extrusion	Wire & Cable	Wire & Cable Coating	Mid RV
18	Nylene 603	603	Plasticized, high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.	Public	Nylon 6	134	575	Extrusion	Wire & Cable	Wire & Cable Coating	Plasticized
18	Nylene 603	603	Plasticized, high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.	Public	Nylon 6	134	967	Extrusion	Monofilament	Filament Line
18	Nylene 603	603	Plasticized, high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.	Public	Nylon 6	134	968	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene 607	607	Very high viscosity extrusion resin having an ASTM relative viscosity of 800. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	135	576	Extrusion	Film	Blown & Cast
18	Nylene 607	607	Very high viscosity extrusion resin having an ASTM relative viscosity of 800. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	135	693	Blow Molding	Prime Grade	Very High Viscosity	Very High RV
18	Nylene 607	607	Very high viscosity extrusion resin having an ASTM relative viscosity of 800. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	135	973	Extrusion	Tubing & Profile	Pipe Profiles
18	Nylene 607	607	Very high viscosity extrusion resin having an ASTM relative viscosity of 800. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	135	974	Extrusion	Tubing & Profile	Rods & Other Profiles
18	Nylene 607 (ISO)	607 (ISO)	Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Very high viscosity extrusion resin having an Sulfuric Acid viscosity of 6. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	959	938	Blow Molding	Prime Grade	Very High Viscosity	Very High RV
18	Nylene 607 (ISO)	607 (ISO)	Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Very high viscosity extrusion resin having an Sulfuric Acid viscosity of 6. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	959	939	Extrusion	Film	Blown & Cast	Very High RV
18	Nylene 607 (ISO)	607 (ISO)	Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Very high viscosity extrusion resin having an Sulfuric Acid viscosity of 6. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	959	970	Extrusion	Tubing & Profile	Smooth Tubing	Very High RV
18	Nylene 607 (ISO)	607 (ISO)	Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Very high viscosity extrusion resin having an Sulfuric Acid viscosity of 6. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	959	971	Extrusion	Tubing & Profile	Pipe Profiles	Very High RV
18	Nylene 607 (ISO)	607 (ISO)	Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. Very high viscosity extrusion resin having an Sulfuric Acid viscosity of 6. Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.	Public	Nylon 6	959	972	Extrusion	Tubing & Profile	Rods & Other Profiles	Very High RV
1	Nylene 608	608	Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die.	Public	Nylon 6	984	1.035	Extrusion	Film	Multi-ply	High RV
1	Nylene 608	608	Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die.	Public	Nylon 6	984	1.036	Extrusion	Film	Outer-layer	High RV
1	Nylene 608	608	Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die.	Public	Nylon 6	984	1.041	Extrusion	Film	Blown	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	381	Extrusion	Film	Blown & Cast	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	382	Extrusion	Film	Coating	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	1.037	Extrusion	Tubing & Profile	Smooth Tubing	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	1.038	Extrusion	Tubing & Profile	Pipe Profiles	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	1.039	Extrusion	Tubing & Profile	Rods & Other Profiles	High RV
18	Nylene 609	609	Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating Can also be used for blow molding applications Optimum processing conditions should permit for a melt temperature of 550 – 575°F (289 – 301°C) at the die. Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions	Public	Nylon 6	136	1.165	Compounding	High RV – Compounding	High RV – Compounding	High RV
2	Nylene 6111 HS	6111 HS	Nylene 6111 HS is an impact modified, heat-stabilized nylon 6/6 with 40% mineral reinforcement.	Public	Nylon 6/6	138	764	Injection Molding	Prime Grade	Reinforced Impact Modified	40% MIN
2	Nylene 6140 HS	6140 HS	Nylene 6140 HS is a heat-stabilized nylon 6/6 with 40% mineral reinforcement. Designed for maximum dimensional stability and high stiffness characteristics	Public	Nylon 6/6	139	704	Injection Molding	Prime Grade	Reinforced	40% MIN
18	Nylene 615	615	Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Meets the requirements of FDA regulation for direct food contact Nylene 615 does not absorb food odors	Public	Nylon 6	140	578	Extrusion	Film	Blown & Cast	Co-extrusion
18	Nylene 615	615	Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Meets the requirements of FDA regulation for direct food contact Nylene 615 does not absorb food odors	Public	Nylon 6	140	996	Compounding	Mid RV – Compounding	Mid RV – Compounding	General Purpose
18	Nylene 615-130HSU	615-130HSU	Plasticized, heat stabilized high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	1.085	1.135	Extrusion	Monofilament	Fishing Line
18	Nylene 615-130HSU	615-130HSU	Plasticized, heat stabilized high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	1.085	1.136	Extrusion	Monofilament	Single Untwisted Thread
18	Nylene 615-130HSU	615-130HSU	Plasticized, heat stabilized high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	1.085	1.137	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene 615-130HSU	615-130HSU	Plasticized, heat stabilized high residual monomer resin designed for extrusion applications Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	1.085	1.138	Extrusion	Wire & Cable	Wire & Cable Coating
18	Nylene 615-70U	615-70U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	945	922	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene 615-70U	615-70U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	945	1.065	Extrusion	Wire & Cable	Wire & Cable Coating
18	Nylene 615-70U	615-70U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	945	1.067	Extrusion	Monofilament	Single Untwisted Thread
18	Nylene 615-70U	615-70U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	945	1.068	Extrusion	Monofilament	Fishing Line
18	Nylene 615-70UP	615-70UP	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	946	923	Extrusion	Tubing & Profile	Smooth Tubing	Plasticized
18	Nylene 615-70UP	615-70UP	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	946	1.003	Extrusion	Wire & Cable	Wire & Cable Coating	Plasticized
18	Nylene 615-70UP	615-70UP	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	946	1.004	Extrusion	Monofilament	Single Untwisted Thread	Plasticized
18	Nylene 615-70UP	615-70UP	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	946	1.082	Extrusion	Monofilament	Fishing Line	Plasticized
18	Nylene 615-80U	615-80U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	1.084	1.131	Extrusion	Monofilament	Fishing Line
18	Nylene 615-80U	615-80U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	1.084	1.132	Extrusion	Monofilament	Single Untwisted Thread
18	Nylene 615-80U	615-80U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	1.084	1.133	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene 615-80U	615-80U	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	1.084	1.134	Extrusion	Wire & Cable	Wire & Cable Coating
18	Nylene 615C	615C	Meets the requirements of FDA regulation for direct food contact Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Nylene 615C does not absorb food odors	Public	Nylon 6	820	707	Extrusion	Film	Cast	Co-extrusion
18	Nylene 615I	615I	Meets the requirements of FDA regulation for direct food contact Extrusion grade resin suitable for film co-extrusion applications and blown film Nylene 615I does not absorb food odors	Public	Nylon 6	143	584	Extrusion	Film	Blown & Cast	High RV
18	Nylene 615I	615I	Meets the requirements of FDA regulation for direct food contact Extrusion grade resin suitable for film co-extrusion applications and blown film Nylene 615I does not absorb food odors	Public	Nylon 6	143	1.016	Extrusion	Film	Co-extrusion	High RV
18	Nylene 615NP	615NP	Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging Like most PA6, Nylene 615NP has excellent grease resistance, toughness, and resistance to abrasion	Public	Nylon 6	142	582	Extrusion	Film	Blown & Cast	High RV
18	Nylene 615NP	615NP	Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging Like most PA6, Nylene 615NP has excellent grease resistance, toughness, and resistance to abrasion	Public	Nylon 6	142	1.009	Extrusion	Tubing & Profile	Smooth Tubing	High RV
18	Nylene 615SA	615SA	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Nylene 615SA has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Good oxygen and flavor barrier to increase shelf life Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	144	411	Extrusion	Film	Mono-layer & multi-layer	High RV
18	Nylene 615SA	615SA	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Nylene 615SA has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Good oxygen and flavor barrier to increase shelf life Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	144	412	Extrusion	Film	Blown & Coextrusion	High RV
18	Nylene 615SA	615SA	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Nylene 615SA has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Good oxygen and flavor barrier to increase shelf life Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	144	1.028	Extrusion	Tubing & Profile	Pipe Profiles	High RV
18	Nylene 615SA	615SA	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Nylene 615SA has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Good oxygen and flavor barrier to increase shelf life Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	144	1.029	Extrusion	Tubing & Profile	Rods & Other Profiles	High RV
18	Nylene 615SA L	615SA L	Extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film. This product contains a special anti-block and has excellent melt stability and good melt strength. Nylene 615SA L has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors.	Public	Nylon 6	803	682	Extrusion	Film	Blown	High RV
18	Nylene 615SA L	615SA L	Extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film. This product contains a special anti-block and has excellent melt stability and good melt strength. Nylene 615SA L has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors.	Public	Nylon 6	803	684	Extrusion	Film	Co-extrusion	High RV
18	Nylene 615SA N	615SA N	Nylene® 615SA N is an extrusion grade nylon 6 resin suitable for cast and blown film in mono- or co-extrusion applications. Nylene® 615SA N is highly crystalline which yields good roll uniformity in cast film plus a low coefficient of friction. Nylene® 615SA N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene® 615SA N meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact.	Public	Nylon 6	1.002	997	Extrusion	Film	Blown & Cast	Mono-extrusion
18	Nylene 615SA N	615SA N	Nylene® 615SA N is an extrusion grade nylon 6 resin suitable for cast and blown film in mono- or co-extrusion applications. Nylene® 615SA N is highly crystalline which yields good roll uniformity in cast film plus a low coefficient of friction. Nylene® 615SA N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene® 615SA N meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact.	Public	Nylon 6	1.002	999	Extrusion	Film	Blown & Cast	Co-extrusion
1	Nylene 6240 HS	6240 HS	Mineral reinforced,heat-stabilized nylon 6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, while having a very good surface appearance	Public	Nylon 6	145	586	Injection Molding	Prime Grade	Reinforced	40% MIN
24	Nylene 6250L	6250L	Nylene 6250L is a low viscosity nylon 6/12 molding resin. This material us used in applications requiring good electrical insulation properties. When molding, Nylene 6250L has high flow characteristics at minimum temperatures.	Public	Nylon 6/12	1.078	1.112	Injection Molding	General Purpose	Nylon 6,12	Low RV
2	Nylene 6440 HS	6440 HS	Nylene 6440 HS is a 36% mineral reinforced, impact modified and heat-stabilized nylon 6/6 with excellent impact resistance.	Public	Nylon 6/6	146	765	Injection Molding	Prime Grade	Reinforced	36% MIN
1	Nylene 7115 HS	7115 HS	40% glass fiber and mineral reinforced, heat stabilized nylon 6 injection molding resin Suitable for a wide variety of applications that require both high strength performance and good appearance	Public	Nylon 6	147	587	Injection Molding	Prime Grade	Reinforced	15% GF / 25% MIN
1	Nylamid 7115-02 BK	7115-02 BK	Nylamid 7115-02 BK is an economical, mineral and glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	953	930	Injection Molding	Economy Grade	Reinforced	15% GF / 25% MIN
1	Nylene 7115-02 HS	7115-02 HS	Nylene 7115-02 is a mineral and glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	813	697	Injection Molding	Economy Grade	Reinforced	15% GF / 25% MIN
1	Nylamid 7115-04 BK	7115-04 BK	Nylamid 7115-04 BK is an economical, mineral and glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	956	934	Injection Molding	Economy Grade	Reinforced	15% GF / 25% MIN
2	Nylene 7139	7139	Nylene 7139 is a nylon 66 resin containing 1% molybdenum disulfide which provides reduced friction and wear without significantly affecting other engineering properties.	Public	Nylon 6/6	860	800	Injection Molding	Prime Grade		1% Mol
2	Nylene 7139 HS	7139 HS	Nylon 6/6 Homopolymer resin with increased wear resistance and lubricity. Suitable for injection molding applications. Has the inherent strength, lubricity, and chemical resistance common to nylon 6/6 homopolymer materials while exhibiting lower friction and wear characteristics.	Public	Nylon 6/6	148	770	Injection Molding	Prime Grade
2	Nylene 7140	7140	Nylene 7140 is a nylon 66 resin containing 2.5% molybdenum disulfide providing greatly reduced friction and wear without significantly affecting other engineering properties.	Public	Nylon 6/6	149	629	Injection Molding	Prime Grade	Unfilled	MO 2.5% (Molybdenum)
2	Nylene 7140 HS	7140 HS	Nylon 6/6 Homopolymer resin with increased wear resistance and lubricity Suitable for injection molding applications Has the inherent strength, lubricity, and chemical resistance common to nylon 6/6 homopolymer materials while exhibiting lower friction and wear characteristics	Public	Nylon 6/6	857	797	Injection Molding	Prime Grade	Homopolymer
1	Nylene 721	721	Medium-impact modified nylon 6 for fast, easy molding Suitable for applications where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range. Parts molded from 721 have good impact strength right out of the mold without post conditioning	Public	Nylon 6	150	588	Injection Molding	Prime Grade
1	Nylene 7212 HS BK	7212 HS BK	Heat-stabilized, mineral and glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties	Public	Nylon 6	151	589	Injection Molding	Prime Grade	Reinforced	GF/MF
2	Nylene 7215 HS	7215 HS	40% glass fiber and mineral reinforced, heat stabilized nylon 6/6 injection molding resin High strength and stiffness, and very good dimensional stability Suitable for a wide variety of applications that require both high strength performance and excellent dimensional stability	Public	Nylon 6/6	152	630	Injection Molding	Prime Grade	Reinforced	40% GF/MIN
2	Nylene 7215 HS BK	7215 HS BK	Nylene 7215 HS BK is a nylon 6,6 resin containing 40 percent of a mineral and glass fiber combination providing good surface appearance and excellent engineering properties.	Public	Nylon 6/6	800	677	Injection Molding	Prime Grade	Reinforced	40% GF/MIN
1	Nylene 7232 HS MS WPP848 BK	7232 HS MS WPP848 BK	Nylene 7232 HS MS WPP848 BK is a black, heat-stabilized, lubricated (molybdenum disulfide), 32% glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	858	798	Injection Molding	Prime Grade	Reinforced	32% GF
1	Nylene 7232 HS WPP848 BK	7232 HS WPP848 BK	Nylene 7232 HS WPP848 BK is a heat-stabilized, glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.	Public	Nylon 6	859	799	Injection Molding	Specialty Grade	Reinforced	32% GF
1	Nylene 724	724	Nylon 6 heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding Stiffness is near that of unmodified nylon 6 Barrel temperatures should be in the 450°F – 500°F range. In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning	Public	Nylon 6	153	590	Injection Molding	Prime Grade	Unfilled Impact Modified	Fast Cycle
1	Nylene 7250C HS	7250C HS	Glass and ceramic fiber reinforced nylon 6 injection molding material. Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products. Suitable for such uses as valve bodies, pump housings and other applications which require this unique set of characteristics.	Public	Nylon 6	154	591	Injection Molding	Specialty Grade	Reinforced	GF/CR
1	Nylene 733	733	Highly impact modified nylon 6 suitable for both molding and extrusion Parts molded from 733 have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	155	592	Injection Molding	Prime Grade
1	Nylene 743	743	Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. High impact modified nylon 6 suitable for both molding and extrusion. Parts molded from 743 have excellent impact strength right out of the mold without post conditioning. Outstanding high strength and high cold temperature impact.	Public	Nylon 6	938	914	Extrusion	Tubing & Profile	Smooth Tubing
1	Nylene 743	743	Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. High impact modified nylon 6 suitable for both molding and extrusion. Parts molded from 743 have excellent impact strength right out of the mold without post conditioning. Outstanding high strength and high cold temperature impact.	Public	Nylon 6	938	915	Injection Molding	Prime Grade	Unfilled Impact Modified
1	Nylene 743 BLK	743 BLK	Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. High impact modified nylon 6 suitable for both molding and extrusion. Outstanding high strength and high cold temperature impact. Parts molded from 743 have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	939	916	Extrusion	Tubing & Profile	Smooth Tubing	Unreinforced
1	Nylene 743 BLK	743 BLK	Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. High impact modified nylon 6 suitable for both molding and extrusion. Outstanding high strength and high cold temperature impact. Parts molded from 743 have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	939	917	Injection Molding	Prime Grade	Unfilled Impact Modified	Unreinforced
1	Nylene 743HS	743HS	Heat stabilized, high impact modified nylon 6 suitable for both molding and extrusion. Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. Outstanding high strength and high cold temperature impact. In addition to heat stabilization to prevent thermal degradation, parts molded from 743 HS have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	157	643	Extrusion	Tubing & Profile	Smooth Tubing
1	Nylene 743HS	743HS	Heat stabilized, high impact modified nylon 6 suitable for both molding and extrusion. Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. Outstanding high strength and high cold temperature impact. In addition to heat stabilization to prevent thermal degradation, parts molded from 743 HS have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	157	644	Injection Molding	Prime Grade
1	Nylene 743HS	743HS	Heat stabilized, high impact modified nylon 6 suitable for both molding and extrusion. Cylinder temperatures should be in the 435 – 525ºF range. Designed for excellent cold temperature impact. Outstanding high strength and high cold temperature impact. In addition to heat stabilization to prevent thermal degradation, parts molded from 743 HS have excellent impact strength right out of the mold without post conditioning.	Public	Nylon 6	157	987	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene 764B	764B	Nylene 764B is a heat stabilized, high impact modified nylon suitable for both blow-molding and extrusion. In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 764B have excellent impact strength right out of the mold without post conditioning. Outstanding features of Nylene 764B include high strength and high cold temperature impact. Cylinder temperatures should be in the 435 – 525ºF (224 – 274 ºC) range. Excellent melt strength to support large parisons	Public	Nylon 6	158	383	Blow Molding	Prime Grade	Unfilled Impact Modified	High Impact
18	Nylene 764B	764B	Nylene 764B is a heat stabilized, high impact modified nylon suitable for both blow-molding and extrusion. In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 764B have excellent impact strength right out of the mold without post conditioning. Outstanding features of Nylene 764B include high strength and high cold temperature impact. Cylinder temperatures should be in the 435 – 525ºF (224 – 274 ºC) range. Excellent melt strength to support large parisons	Public	Nylon 6	158	384	Extrusion	Tubing & Profile	Smooth Tubing	High Impact
2	Nylamid 8005	8005	Nylamid 8005 is an impact-modified, compounded nylon 6,6 based on low cost feed stocks. This product is a good alternative for applications where cost and performance are equally important.	Public	Nylon 6/6	969	949	Injection Molding	Prime Grade	Unfilled Impact Modified	Compounded
1	Nylene 8005 HSL	8005 HSL	Nylene 8005 or 8005 HSL is an economy grade, impact modified PA 6,6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 with a good impact	Public	Nylon 6	159	771	Injection Molding	Prime Grade
2	Nylamid 8005 HSL SP10	8005 HSL SP10	Nylamid 8005 HSL SP10 is an impact-modified nylon. This product is a good alternative for applications where cost and performance are equally important.	Public	Nylon 6/6	770	648	Injection Molding	Economy Grade	Unfilled
24	Nylene 8100	8100	Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption	Public	Nylon 6/12	160	742	Injection Molding	Prime Grade
1	Nylene 826	826	Nylon 6 based copolymer suitable for both blown and cast film coextrusion Lower melting point and is less crystalline than nylon 6 Excellent toughness, chemical resistance, transparency, and low oxygen permeability Films made using Nylene 826 exhibit superior deep draw characteristics Because Nylene 826 is polymerized using a continuous process, it has good lot-to-lot consistency.	Public	Nylon 6	161	593	Extrusion	Film	Blown & Cast	Co-extrusion
23	Nylene 9110	9110	General purpose unreinforced nylon 6,10 injection molding grade. Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10. Suitable for applications where moisture pickup may be a concern.	Public	Nylon 6/10	163	772	Injection Molding	Prime Grade	Unfilled
3	Nylene 9110 G33	9110 G33	33% glass fiber reinforced nylon 6/10 injection molding grade. Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6,10. Suitable for applications where moisture pickup may be a concern.	Public	Copolymers	164	774	Injection Molding	Prime Grade	Reinforced	33% GF
23	Nylamid 9110 G40 BK	9110 G40 BK	Nylamid 9110 G40 BK is a 40% glass fiber-reinforced nylon 6/10 molding resin offering the good strength properties expected from glass filled materials.	Public	Nylon 6/10	762	637	Injection Molding	Specialty Grade	Reinforced	40% GF
2	Nylene 9110 G43	9110 G43	43% glass fiber reinforced nylon 6/10 injection molding grade. Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10. Suitable for applications where moisture pickup may be a concern.	Public	Nylon 6/6	165	773	Injection Molding	Prime Grade	Reinforced	43% GF
24	Nylene 9533	9533	Nylene 9533 is a 33% glass fiber-reinforced nylon 6/12 molding resin with high modulus and good impact properties.	Public	Nylon 6/12	855	793	Injection Molding	Prime Grade	Reinforced	33% GF
24	Nylene 9533 HS	9533 HS	Nylene 9533 HS is a 33% glass fiber-reinforced nylon 6/12 molding resin with high modulus and good impact properties.	Public	Nylon 6/12	166	736	Injection Molding	Prime Grade	Reinforced	33% GF
24	Nylene 9543 HS	9543 HS	Good chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements	Public	Nylon 6/12	167	735	Injection Molding	Prime Grade	Reinforced	43% GF
20	Nylene 9633	9633	33% glass fiber reinforced nylon 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 UV for UV protection and UW for Weatherability.	Public	Nylon 6/66	168	775	Injection Molding	Prime Grade	Reinforced	33% GF
20	Nylene 9643	9643	43% glass fiber reinforced nylon 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 UV for UV protection and UW for Weatherability.	Public	Nylon 6/66	169	776	Injection Molding	Prime Grade	Reinforced	43% GF
18	Nylene BS-600-CSDN	BS-600-CSDN	Nylene® BS 600 CSDN is a cationic resin reformulated to include built-in Enhanced Acid Stain Resistance as either extruded white dyed BCF or as extruded SDN BCF. Spinning Grade Polymer-Cationic Dye (low amine end group)	Public	Nylon 6	990	1.084	Extrusion	Fiber Extrusion	Carpet Fiber Spinning	Stain Resistant
1	Nylene BS-700-A	BS-700-A	Spinning Grade Polymer-Medium Dye	Public	Nylon 6	172	605	Extrusion	Fiber Extrusion	Carpet Fiber Spinning	Medium Dye
1	Nylene BS-700-D	BS-700-D	Spinning Grade Polymer-Deep Dye (high amine end group)	Public	Nylon 6	173	606	Extrusion	Fiber Extrusion	Carpet Fiber Spinning	Deep Dye
1	Nylene BS-700-D	BS-700-D	Spinning Grade Polymer-Deep Dye (high amine end group)	Public	Nylon 6	173	1.171	Injection Molding	General Purpose	Medium Viscosity	Mid RV
1	Nylene BS-700-D	BS-700-D	Spinning Grade Polymer-Deep Dye (high amine end group)	Public	Nylon 6	173	1.172	Compounding	Mid RV – Compounding	General Purpose	Mid RV
1	Nylene BX3WQ662	BX3WQ662	Nylene BX3WQ662 is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. This product possesses higher extractables for a balance of performance properties. Shields PVC from impact which causes cracking and breaking and general deterioration of the product. Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.	Public	Nylon 6	175	600	Extrusion	Wire & Cable	Electrical Wire Insulation	Mid RV
1	Nylene BX3WQ662X	BX3WQ662X	Nylene® BX3WQ662X is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. This product possesses higher extractables for a balance of performance properties. Shields PVC from impact which causes cracking and breaking and general deterioration of the product. Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.	Public	Nylon 6	832	746	Extrusion	Wire & Cable	Electrical Wire Insulation	Mid RV
17	Nylene CP11111	CP11111	Because this material is polymerized using a continuous process, it has good lot-to-lot consistency. Nylene® CP11111 has a lower melting point and is less crystalline than standard 6/66 copolymer, thus it imparts a softer feel when used for film. Nylene® CP11111 is a Polyamide terpolymer with 6/66/69 copolymer content. It is suitable for both blown and cast film co-extrusion. Meets the requirements of FDA regulation for direct food contact	Public	Nylon 6/69	881	838	Extrusion	Film	Blown & Cast	High RV
17	Nylene CP11111	CP11111	Because this material is polymerized using a continuous process, it has good lot-to-lot consistency. Nylene® CP11111 has a lower melting point and is less crystalline than standard 6/66 copolymer, thus it imparts a softer feel when used for film. Nylene® CP11111 is a Polyamide terpolymer with 6/66/69 copolymer content. It is suitable for both blown and cast film co-extrusion. Meets the requirements of FDA regulation for direct food contact	Public	Nylon 6/69	881	1.080	Extrusion	Film	Co-extrusion	High RV
20	Nylene CP11211	CP11211	FDA 21 CFR 177.1500 Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6/66 grades Nylene CP11211 is suitable for use in extrusion, and blown film applications Suitable for high clarity film	Public	Nylon 6/66	932	906	Extrusion	Film	Blown & Cast	High RV
20	Nylene CP11211	CP11211	FDA 21 CFR 177.1500 Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6/66 grades Nylene CP11211 is suitable for use in extrusion, and blown film applications Suitable for high clarity film	Public	Nylon 6/66	932	907	Extrusion	Film	Co-extrusion	High RV
20	Nylene CP11211	CP11211	FDA 21 CFR 177.1500 Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6/66 grades Nylene CP11211 is suitable for use in extrusion, and blown film applications Suitable for high clarity film	Public	Nylon 6/66	932	1.074	Extrusion	Tubing & Profile	Smooth Tubing	High RV
20	Nylene CP11411	CP11411	Custom Resins’ Nylene® CP11411 is a Nylon 6/6,6 copolymer suitable for both blown and cast film co-extrusion. Because Nylene?« CP11411 is polymerized using a continuous process, it has good lot-to-lot consistency.	Public	Nylon 6/66	882	839	Extrusion	Film	Blown & Cast	Mid RV
20	Nylene CP11411	CP11411	Custom Resins’ Nylene® CP11411 is a Nylon 6/6,6 copolymer suitable for both blown and cast film co-extrusion. Because Nylene?« CP11411 is polymerized using a continuous process, it has good lot-to-lot consistency.	Public	Nylon 6/66	882	840	Extrusion	Film	Co-extrusion	Mid RV
19	Nylene CP41211	CP41211	Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Meets the requirements of FDA regulation for direct food contact Nylene CP41211 is suitable for use in extrusion, and film applications Suitable for high clarity film	Public	Nylon 6/66/9	931	904	Extrusion	Film	Blown & Cast	High RV
19	Nylene CP41211	CP41211	Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Meets the requirements of FDA regulation for direct food contact Nylene CP41211 is suitable for use in extrusion, and film applications Suitable for high clarity film	Public	Nylon 6/66/9	931	905	Extrusion	Tubing & Profile	Smooth Tubing	High RV
19	Nylene CP41215	CP41215	Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Meets the requirements of FDA regulation for direct food contact Nylene CP41215 is suitable for use in extrusion, and film applications Suitable for high clarity film	Public	Nylon 6/66/9	930	901	Extrusion	Film	Blown & Cast	High RV
20	Nylene CP41411	CP41411	Nylene® CP41411 is a Nylon 6,6,6 copolymer suitable for both blown and cast film co-extrusion. This product can be processed effectively with extruder barrel and die temperatures set to give melt temperatures in the range of 440 – 500 °F (227 – 260 °C). Because Nylene CP41411 is polymerized using a continuous process, it has good lot-to-lot consistency.	Public	Nylon 6/66	867	807	Extrusion	Film	Blown & Cast	Co-extrusion
17	Nylene CP81121	CP81121	Nylene CP81121 is a high viscosity, extrusion grade, nylon 6/69 copolymer. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die. Nylene 6/69 copolymers are designed for improved clarity compared to nylon 6.	Public	Nylon 6/69	1.081	1.127	Extrusion	Monofilament	High Viscosity	High RV
17	Nylene CP81121	CP81121	Nylene CP81121 is a high viscosity, extrusion grade, nylon 6/69 copolymer. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die. Nylene 6/69 copolymers are designed for improved clarity compared to nylon 6.	Public	Nylon 6/69	1.081	1.128	Extrusion	Monofilament	Trimmer Line	High RV
17	Nylene CP81311	CP81311	Has a lower melt point and is less crystalline than standard nylon 6 resins. In addition to excellent toughness, chemical resistance, transparency, and low oxygen permeability, films exhibit superior deep-drawing characteristics. Nylene CP81311 is a high RV nylon copolymer suitable for both blown and cast film co-extrusion. Because Nylene CP81311 is polymerized using a continuous process, it has good lot-to-lot consistency. Excellent toughness, chemical resistance, transparency, and low oxygen permeability Films made using Nylene CP81311 exhibit superior deep draw characteristics	Public	Nylon 6/69	947	924	Extrusion	Film	Blown & Cast	High RV
18	Nylene CPNX3411	CPNX3411	Extrusion grade nylon copolymer resin suitable for film co-extrusion applications and blown film Meets the requirements of FDA regulation for direct food contact Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors	Public	Nylon 6	879	824	Extrusion	Film	Blown & Cast	High RV
18	Nylene CPNX3411	CPNX3411	Extrusion grade nylon copolymer resin suitable for film co-extrusion applications and blown film Meets the requirements of FDA regulation for direct food contact Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors	Public	Nylon 6	879	825	Extrusion	Film	Co-extrusion	High RV
18	Nylene CX3395	CX3395	Nylene CX3395 is a high RV nylon 6,69 copolymer suitable for both blown and cast film co-extrusion. CX3395 has a lower melt point and is less crystalline than standard nylon 6 resins. In addition to it’s excellent film application properties, CX3395 exhibits superior deep-drawing characteristics.	Public	Nylon 6	179	781	Extrusion	Film	Blown & Cast	High RV
3	Nylene CX3451	CX3451	Injection molding grade copolymer nylon developed for high clarity Suitable for applications where clarity, toughness, and chemical resistance are required Maximum clarity is achieved by using low mold temperatures	Public	Copolymers	180	784	Injection Molding	Prime Grade	Unfilled
17	Nylene CX3492	CX3492	Nylene® CX3492 is a high viscosity, plasticized, nylon 6/69. Nylene® CX3492 was designed for extrusion applications especially monofilament.	Public	Nylon 6/69	339	831	Extrusion	Monofilament	Trimmer Line	High RV
1	Nylene MACH 6	MACH 6	MACH 6 is a lubricated, nylon 6 designed for very fast cycling. Crystallization initiators provide fast molding cycles through rapid melt set-up. Most useful for applications requiring greater stiffness and a higher heat distortion temperature. Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon.	Public	Nylon 6	936	910	Injection Molding	Prime Grade	Unfilled	Fast Cycle
1	Nylene NX-1440 SP CB	NX-1440 SP CB	NX1440 SP CB is a nucleated medium viscosity nylon 6 molding resin useful for applications requiring greater stiffness and a higher heat distortion temperature.	Public	Nylon 6	778	657	Injection Molding	Specialty Grade	Unreinforced	Mid RV
1	Nylene NX1170	NX1170	NYLENE® NX 1170 is a PA 6 copolymer, high viscosity grade formulated to give low wear properties through use of molybdenum disulfide at a high loading level.	Public	Nylon 6	863	803	Compounding	High RV – Compounding	High RV – Compounding	MO 1% (Molybdenum)
1	Nylene NX1170	NX1170	NYLENE® NX 1170 is a PA 6 copolymer, high viscosity grade formulated to give low wear properties through use of molybdenum disulfide at a high loading level.	Public	Nylon 6	863	977	Extrusion	Tubing & Profile	Pipe Profiles	High RV
1	Nylene NX1170 HS	NX1170 HS	Nylene NX 1170 HS is a high viscosity, heat stabilized grade formulated to give low wear properties through use of molybdenum disulfide at the 5 percent level.	Public	Nylon 6	185	611	Compounding	High RV – Compounding	High RV – Compounding	Low Wear
1	Nylene NX1440	NX1440	Nylene NX1440 is a nucleated medium viscosity, fast cycle molding resin. Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from other nylon Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. Crystallization initiators provide fast molding cycles through rapid melt set-up. Most useful for applications requiring greater stiffness and a higher heat distortion temperature.	Public	Nylon 6	56	394	Injection Molding	Prime Grade	Fast Cycling	Mid RV
1	Nylene NX3024	NX3024	Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Meets the requirements of FDA regulation for direct food contact Optimum processing conditions should provide a melt temperature of 480 – 500°F at the die Excellent melt stability and good melt strength Nylene NX3024 does not absorb food odors	Public	Nylon 6	187	612	Extrusion	Film	Blown & Cast	Co-extrusion
1	Nylene NX3024	NX3024	Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Meets the requirements of FDA regulation for direct food contact Optimum processing conditions should provide a melt temperature of 480 – 500°F at the die Excellent melt stability and good melt strength Nylene NX3024 does not absorb food odors	Public	Nylon 6	187	613	Compounding	Mid RV – Compounding	Mid RV – Compounding
18	Nylene NX3055I	NX3055I	High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. Suitable for some profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	929	898	Extrusion	Film	Blown & Cast	Co-extrusion
18	Nylene NX3055I	NX3055I	High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. Suitable for some profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	929	899	Extrusion	Film	Blown & Cast	mono-extrusion
18	Nylene NX3055I	NX3055I	High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. Suitable for some profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	929	1.011	Extrusion	Tubing & Profile	Rods & Other Profiles
18	Nylene NX3055I	NX3055I	High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. Suitable for some profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	929	1.017	Extrusion	Tubing & Profile	Smooth Tubing
18	Nylene NX3055I	NX3055I	High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. Suitable for some profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	929	1.018	Extrusion	Tubing & Profile	Pipe Profiles
18	Nylene NX3064N	NX3064N	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene NX3064N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	926	890	Extrusion	Film	Blown & Cast	High RV
18	Nylene NX3064N	NX3064N	High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). Suitable for profile extrusion such as tubing, shapes, etc. Good oxygen and flavor barrier to increase shelf life Nylene NX3064N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene films can be drawn to provide pockets for many food shapes. Offers chemical and heat resistance for hot filling wide range of food and chemicals	Public	Nylon 6	926	892	Extrusion	Film	Co-extrusion	High RV
18	Nylene NX3411 (2)	NX3411 (2)		Public	Nylon 6	997	1.001	Extrusion	Film	Blown & Cast
18	Nylene NX3411HSL	NX3411HSL	Nylene NX3411HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	888	849	Extrusion	Film	Blown & Cast	High RV
18	Nylene NX3411HSL Hi-RV	NX3411HSL Hi-RV	Nylene NX3411HSL Hi-RV is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6	950	928	Extrusion	Film	Blown & Cast	High RV
18	Nylene NX4001A	NX4001A	High viscosity, nucleated, nylon 6 extrusion grade resin Crystallization initiators provide rapid melt set-up in higher speed processing applications Optimum processing conditions should provide a melt temperature of 550 – 575°F at the die	Public	Nylon 6	191	622	Extrusion	Tubing & Profile	Smooth Tubing	High RV
18	Nylene NX4001A	NX4001A	High viscosity, nucleated, nylon 6 extrusion grade resin Crystallization initiators provide rapid melt set-up in higher speed processing applications Optimum processing conditions should provide a melt temperature of 550 – 575°F at the die	Public	Nylon 6	191	979	Extrusion	Tubing & Profile	Pipe Profiles	High RV
18	Nylene NX4001A	NX4001A	High viscosity, nucleated, nylon 6 extrusion grade resin Crystallization initiators provide rapid melt set-up in higher speed processing applications Optimum processing conditions should provide a melt temperature of 550 – 575°F at the die	Public	Nylon 6	191	980	Extrusion	Tubing & Profile	Rods & Other Profiles	High RV
1	Nylene NX4301	NX4301	High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion Optimum processing conditions should permit for a melt temperature of 550 – 575°F at the die. (Available in black only)	Public	Nylon 6	193	623	Extrusion	Tubing & Profile	Smooth Tubing	High RV
1	Nylene NX4301	NX4301	High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion Optimum processing conditions should permit for a melt temperature of 550 – 575°F at the die. (Available in black only)	Public	Nylon 6	193	981	Extrusion	Tubing & Profile	Pipe Profiles	High RV
1	Nylene NX4301	NX4301	High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion Optimum processing conditions should permit for a melt temperature of 550 – 575°F at the die. (Available in black only)	Public	Nylon 6	193	982	Extrusion	Tubing & Profile	Rods & Other Profiles	High RV
18	Nylene NX4555	NX4555	Nucleated extrusion grade suitable for cast and blown film Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Excellent melt stability and good melt strength, plus faster set-up for increased line speeds	Public	Nylon 6	195	833	Extrusion	Film	Blown & Cast	Mid RV
1	Nylene NX4728 HS	NX4728 HS	High flow, heat stabilized nylon 6 homopolymer Recommended for general purpose nylon molding applications in both thin and heavy sections Optimum processing conditions should provide a melt temperature of 450°F – 470°F (232°C – 243°C) at the nozzle NX4728 has special additives to enhance clarity and brilliance of color and is available in translucent white and a variety of colors	Public	Nylon 6	197	835	Injection Molding	General Purpose	Unfilled	Low RV
3	Nylene NX4747	NX4747	Heat stabilized nylon copolymer with 14% glass fiber reinforcement Suitable for such uses as under-the-hood fluid reservoirs Maximum clarity is achieved by using low mold temperatures Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids	Public	Copolymers	198	836	Injection Molding	Prime Grade		14% GF
1	Nylene NX4795	NX4795	Heat stabilized, lubricated nylon 6 intended for use in coating wire, usually extrusion coated over a layer of PVC on electrical wires for toughness, temperature resistance, and insulating properties, and contains a high slip additive for ease of use when pulling wire through conduit. Delivered dry, with less than 0.2% moisture, and can be extruded as received.	Public	Nylon 6	199	1.095	Extrusion	Wire & Cable	Electrical Wire Insulation	Plasticized
1	Nylene NX4797	NX4797	Nylene NX4797 is a nylon 6 polymer designed for use in extrusion of cast and blown film. Like most PA6, it has excellent grease resistance, toughness, and resistance to abrasion. Films made from Nylene NX4797 have barrier properties against oxygen and aroma typical of nylon 6. Nylene NX4797 meets the requirements of 21 CFR 177.1500 for food contact. Nylene NX4797 has good melt strength for film stability.	Public	Nylon 6	200	792	Extrusion	Film	Blown & Cast	High RV
1	Nylene NX4797	NX4797	Nylene NX4797 is a nylon 6 polymer designed for use in extrusion of cast and blown film. Like most PA6, it has excellent grease resistance, toughness, and resistance to abrasion. Films made from Nylene NX4797 have barrier properties against oxygen and aroma typical of nylon 6. Nylene NX4797 meets the requirements of 21 CFR 177.1500 for food contact. Nylene NX4797 has good melt strength for film stability.	Public	Nylon 6	200	903	Extrusion	Film	Co-extrusion	High RV
18	Nylene NX5703	NX5703	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	944	921	Extrusion	Tubing & Profile	Smooth Tubing	Plastized
18	Nylene NX5703	NX5703	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	944	988	Extrusion	Wire & Cable	Electrical Wire Insulation	Plastized
18	Nylene NX5703	NX5703	Applications include flexible tubing, cable jacketing, as well as mono-filament extrusions Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die. Plasticized, high residual monomer resin designed for extrusion applications	Public	Nylon 6	944	989	Extrusion	Monofilament	Monofilamant Extrusions	Plastized
1	Nylene PA6-205	PA6-205	Compounding, general grade, mid RV, unlubricated.	Public	Nylon 6	1.106	1.183	Extrusion	General Purpose	Medium Viscosity	Mid RV
20	Nylene PAC6-135	PAC6-135	Nylon 6,6/6 copolymer. Nylene PAC6-135 is suitable for use in extrusion, and film applications Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Suitable for high clarity film FDA 21 CFR 177.1500	Public	Nylon 6/66	202	520	Extrusion	Film	Blown & Cast
20	Nylene PAC6-135	PAC6-135	Nylon 6,6/6 copolymer. Nylene PAC6-135 is suitable for use in extrusion, and film applications Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Suitable for high clarity film FDA 21 CFR 177.1500	Public	Nylon 6/66	202	1.015	Extrusion	Tubing & Profile	Smooth Tubing	High RV
20	Nylene PAC690-130HSL	PAC690-130HSL	Nylene PAC690-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/66 copolymer with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6/66	955	933	Extrusion	Film	Blown & Cast	High RV
20	Nylene PAC690-95	PAC690-95	Nylene® PAC690-95 is a Nylon 6/66 copolymer suitable for both blown and cast film co-extrusion. This product can be processed effectively with extruder barrel and die temperatures set to give melt temperatures in the range of 440 – 500 °F (227 – 260 °C). FDA 21 CFR 177.1500 for nylon 6/66 Because Nylene?« PAC690-95 is polymerized using a continuous process, it has good lot-to-lot consistency.	Public	Nylon 6/66	854	790	Extrusion	Film	Blown & Cast	Co-extrusion
18	Nylene PAC900-120U	PAC900-120U	Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6	998	1.119	Extrusion	Film	Coating
18	Nylene PAC900-120U	PAC900-120U	Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6	998	1.120	Extrusion	Monofilament	Fishing Line
18	Nylene PAC900-120U	PAC900-120U	Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6	998	1.121	Extrusion	Wire & Cable	Wire & Cable Coating	High RV
17	Nylene PAC900-120UNL	PAC900-120UNL	Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	1.090	1.162	Extrusion	Film	Coating
17	Nylene PAC900-120UNL	PAC900-120UNL	Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	1.090	1.163	Extrusion	Monofilament	Fishing Line
17	Nylene PAC900-120UNL	PAC900-120UNL	Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	1.090	1.164	Extrusion	Wire & Cable	Wire & Cable Coating	High RV
17	Nylene PAC900-140U	PAC900-140U	Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures. Effective processing is achieved with extruder and die temperatures in the range of 450 – 525 °F (232°C – 274°C) but may be processed as low as 420 °F (216 °C). Nylene PAC900-140U advantages include high elongation, good clarity and flexibility, and lower processing temperatures.	Public	Nylon 6/69	980	1.083	Extrusion	Film	Blown & Cast	High RV
17	Nylene PAC990-130HSL	PAC990-130HSL	Nylene PAC990-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/69 copolymer with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6/69	954	932	Extrusion	Film	Blown & Cast	High RV
17	Nylene PAC990-130HSL	PAC990-130HSL	Nylene PAC990-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/69 copolymer with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6/69	954	1.122	Extrusion	Monofilament	Trimmer Line	High RV
17	Nylene PAC990-130HSL	PAC990-130HSL	Nylene PAC990-130HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6/69 copolymer with a special lubrication package to enhance antiblock properties. Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.	Public	Nylon 6/69	954	1.123	Extrusion	Monofilament	Single Untwisted Thread	High RV
17	Nylene PAC990-140U	PAC990-140U	Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	761	635	Extrusion	Wire & Cable	Wire & Cable Coating	High RV
17	Nylene PAC990-140U	PAC990-140U	Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	761	1.063	Extrusion	Film	Coating
17	Nylene PAC990-140U	PAC990-140U	Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.	Public	Nylon 6/69	761	1.064	Extrusion	Monofilament	Fishing Line
17	Nylene PAC990-55	PAC990-55	Lower melt point compared to nylon 6 = lower processing temperatures Improved ductility Better impact Lower crystallinity material can produce near clear parts at less than 1.5 mm thickness	Public	Nylon 6/69	927	893	Injection Molding	Specialty Grade	Unfilled Impact Modified
6	Naxel PC10	PC10	Un-reinforced general purpose compounded polycarbonate. Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio.	Public	PC & PC Alloy	28	706	Injection Molding	Economy Grade	Compounded	Compounded
18	Nylene PX1719	PX1719	Nylene PX1719 is a heat-stabilized, modified nylon 6 molding and extrusion resin with high impact resistance and low flexural modulus.	Public	Nylon 6	203	794	Injection Molding	Prime Grade
18	Nylene PX1719	PX1719	Nylene PX1719 is a heat-stabilized, modified nylon 6 molding and extrusion resin with high impact resistance and low flexural modulus.	Public	Nylon 6	203	795	Extrusion	Tubing & Profile	Pipe Profiles
18	Nylene PX1719	PX1719	Nylene PX1719 is a heat-stabilized, modified nylon 6 molding and extrusion resin with high impact resistance and low flexural modulus.	Public	Nylon 6	203	976	Extrusion	Tubing & Profile	Rods & Other Profiles
18	Nylene PX3422	PX3422	Nylene PX3422 is very tough heat-stabilized, modified nylon 6 molding resin with very high impact resistance.	Public	Nylon 6	896	863	Extrusion	Film	Packaging Film
18	Nylene PX3422	PX3422	Nylene PX3422 is very tough heat-stabilized, modified nylon 6 molding resin with very high impact resistance.	Public	Nylon 6	896	869	Injection Molding	Prime Grade	Unfilled Impact Modified

Engineered Thermoplastics & Specialty Nylons

Contact Us

Material Replacement

Quote Request

Product Stewardship & Safety Data Sheet Request

Public & Media Inquiries