Technical Data Sheet

Preparing your data sheet file...

Please check your downloads after the page refreshes.

Preparing your data sheet file...

Please check your downloads after the page refreshes.

Download PDF
Download PDF
Send Inquiry

NYLENE USA

1421 Hwy 136 West

Henderson, Kentucky 42420

Phone:270-826-7641
Toll-free:800-626-7050

NYLENE CANADA ULC.

200 McNab Street

Arnprior, Ontario K7S 3P2

Phone:613-623-3191
Toll-free:800-267-7394

ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities

Product is manufactured in  Henderson, KY

Web: www.nylene.com  | Email: info@nylene.com

TDS Ref ID: 1437
Date Updated October 10, 2024

  • Nylene® 494 BLK
  • Technical Data Sheet
Resin Type:
  • Nylon 6
Description:
  • Engineered nylon 6 compound optimized for Rotational Molding
  • Heat stabilization for high-temperature performance
  • Pre-colored black for streamlined production and consistent aesthetics
  • Economical formulation minimizes costs compared to 100% powder
  • Optimized for use alongside Nylene® 494P BLK powder to ensure good part quality
  • Compliant with CARB and EPA fuel permeation regulations, prioritizing environmental sustainability.
Properties ASTM/ISO Procedure Unit English SI
Physical
Specific Gravity D792 1.13 1
Viscosity, FRV D789 70
Water Absorption D570 % 2
Impact
Drop Impact - Roto Specimen, 73°F ARM ft-lbs 75
Mechanical
Tensile Strength At Yield, 73°F D638 psi (MPa) 11500 79
Tensile Elongation D638 % >50 >50
Flexural Modulus D790 psi (MPa) 370000 2,552
Thermal
Deflection Temp. 1/8" bar, 66 psi D648 °F (°C) 310 154
Deflection Temp. 1/8" bar, 264 psi D648 °F (°C) 130 54
Melt Point D3418 °F (°C) 428 220
Flammability
Flame Resistance UL94 .118" (3.0mm) HB
Automotive FMV SS302 Pass

Recommended Processing Considerations: PA6 Rotational Molding

Heating Time20 to 25 min.
Maximum Moisture*0.20%
Oven Temperature
550 - 650°F (288-343°C)

* Available in Pre-Dried, Foil Lined Bags.

jeff.johnson@nylene.com

Fillers/Reinforcements:

    Approvals & Recognition:

    • FMVSS 302: Self Extinguishing
    • CARB: Fuel Permeation Regulation Compliant
    • EPA: Fuel Permeation Regulation Compliant

    Automotive Colors:

    Disclaimer

    Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.

    Call Us

    Nylene USA 800-626-7050
    Nylene Canada 800-267-7394
    Corporate Office 973-694-3549
    CloseMenu

    Product Inquiry

    Quote Request

    Please provide your contact information and your requirements for a Quote or Sample. Alternatively, you can call us at 1-800-626-7050.

    Sample Request

    Please provide us with your requirements or any information on the material you would like to replace. To speak to a representative about your application, please call 1-800-626-7050.

    Product Stewardship & Safety Data Sheet Request

    Please fill out the form below to request safety, compliance, approvals, and certification documents. This will ensure that we provide you with the information that meets your needs and conforms to regional legislation requirements. We send up-to-date SDS via email.

    Contact Sales & Technical Service
    You may also call US: 1-800-626-7050 (Canada: 1-800-267-7394 x200) for media inquiries.