ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Product is manufactured in Henderson, KY
Web: www.nylene.com | Email: firstname.lastname@example.org
TDS Ref ID: 1447 This information was updated on October 3, 2023
Nylene® 494P BLK
Technical Data Sheet
Specially formulated, heat stabilized, nylon powder for the ROTOMOLDING process
Chemical resistance to aromatic solvents, etc. especially at elevated temperatures
Custom colors on demand
Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun.
Higher impact at room and elevated temperatures
Meets the strict CARB and EPA fuel permeation regulations
Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive
0.015 - 0.020
Drop Weight Impact @ RT
Heat Deflection @ 66 psi (0.45 MPa)
Heat Deflection @ 264 psi (1.8 MPa)
Testing conducted on dry-as-molded specimens at 73°F (22.8°C}
Approvals & Recognition:
FMVSS 302: Self Extinguishing
Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.
Nylene USA and Nylene Canada ULC are subsidiaries of the Polymeric Resources Corporation (PRC). Nylene companies develop and manufacture specialty nylons and engineering thermoplastics.