ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Product is manufactured in Henderson, KY
Web: www.nylene.com | Email: firstname.lastname@example.org
TDS Ref ID: 1441 This information was updated on October 3, 2023
Nylene® 494P IM
Technical Data Sheet
Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying.
For uses where HIGH IMPACT properties are required.
Specially formulated nylon powder for the ROTOMOLDING process.
Chemical resistance to aromatic solvents, etc. especially at elevated temperatures
Excellent low temperature impact properties (Special impact modified products)
Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun.
Higher impact at room and elevated temperatures
Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive
0.015 - 0.020
Drop Weight Impact @ RT
Heat Deflection @ 66 psi (0.45 MPa)
Heat Deflection @ 264 psi (1.8 MPa)
Testing conducted on dry-as-molded specimens at 73°F (22.8°C}
Approvals & Recognition:
Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.
Nylene USA and Nylene Canada ULC are subsidiaries of the Polymeric Resources Corporation (PRC). Nylene companies develop and manufacture specialty nylons and engineering thermoplastics.