Nylene 5213-02

Technical Data Sheet

Products

Data Sheet Menu

Current Zoom Level in pixels:

NYLENE USA

1421 Hwy 136 West

Henderson, Kentucky 42420

Phone:270-826-7641
Toll-free:800-626-7050

NYLENE CANADA ULC.

200 McNab Street

Arnprior, Ontario K7S 3P2

Phone:613-623-3191
Toll-free:800-267-7394

ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities

Product is manufactured in  Wayne, NJ

Web: www.nylene.com  | Email: info@nylene.com

 

TDS Ref ID: 1275

  • Nylene® 5213-02
  • Technical Data Sheet
Resin Type:
  • Nylon 6
Description:                 
  • Glass fiber reinforced nylon 6
  • Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins
  • Improved strength and stiffness properties over unreinforced nylon
Properties ASTM/ISO Procedure Unit English SI
Physical
Specific Gravity D792 n/a 1.21 1.21
Mold Shrinkage D955 mm/mm 0.005
Mechanical
Tensile Strength D638 psi (MPa) 15000 103
Flexural Modulus D790 psi (MPa) 700000 4828
Elongation D638 % 3
Notched Izod @ 23°C D256 ft-lb/in (J/m) 0.8 43
Thermal
DTUL @ 264 psi/1.82 MPa D648 °F (°C) 370 188
Melt Point D3418 °F (°C) 420 215
Notes:Testing conducted on dry-as-molded specimens at 73°F (22.8°C}

Recommended Processing Considerations: PA6 Injection Molding - Glass Reinforced < 15%

Pressure psi
Injection 5-15,000
Hold 4-12,000
Back 0-50

Melt Temperature: Nylene PA6 melts at 428°F, (220°C) actual melt temperatures of 440-560°F (227-293°C) are permissible, depending on residence time and shot size.

Mold Temperature: 120-200°F (49-93°C), highly filled grades require 180-200°F (82-93°C) to obtain the best overall surface appearance, higher temperatures will increase crystallinity.

Residence Time: should not exceed 6 minutes if possible, less with higher melt temperatures

Shot Size: should be between 25-75% of barrel capacity.

Fill Rate: fast fill rates are suggested for best surface appearance.

Regrind Level: typically no more than 25% is recommended, with higher levels possible for unfilled grades depending on the end use requirements. Make certain regrind is properly dried to virgin moisture levels.

Drying Temperature: 150-180°F (66-82°C)for 2-4 hours, Nylene® PA6 should be dried to less then 0.20% moisture for optimum performance. Drying longer than 4 hours or at higher temperatures may cause discoloration of the polymer or adversely affect important physical properties.

Fillers/Reinforcements:

  • 13% Glass Filled

Approvals & Recognition:

    Automotive Colors:

    Disclaimer

    Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.

    United-states_flag_icon_round.svg Nylene USA
    Corporate HQ/Facility
    Kentucky Facility
    canada-svgrepo-com.svg Nylene Canada
    Ontario Facility
    Canada Sales Office
    International Flag Icon Round International
    South America
    China
    Malaysia
    Europe/Middle East
    TDS Download Instructions
    For Firefox and Internet Explorer Users
    Skip to content