TDS Ref ID: 794
Product is manufactured in Arnprior, ON
Web: www.nylene.com | Email: info@nylene.com
| Manufacturing Specs | Unit | MIN | MAX | Test Method |
|---|---|---|---|---|
| Copper Content | (ppm) | 35 | 2-7 | |
| Methanol Extractables | (%) | 3.0 | 5.0 | 2-2 |
| Moisture Content | (%) | 0 | 0.15 | 1-3 |
| Relative Viscosity | Unitless, FAV (1) | 45 | 52 | Calculated |
| Relative Viscosity | Unitless, Rv (2) | 2.55 | 2.75 | 2-3 |
| Notes: |
|
|---|
| Zone | °F (C°) |
|---|---|
| Zone 1 | 440-475 (227-246) |
| Zone 2 | 440-475 (227-246) |
| Zone 3 | 440-475 (227-246) |
| Zone 4 | 440-475 (227-246) |
| Zone 5 | 495-540 (257-282) |
| Delivery | °F (C°) |
|---|---|
| Flange | 495-540 (257-282) |
| Crosshead | 495-540 (257-282) |
| Die | 495-540 (257-282) |
DRYING TEMPERATURE:
140-160 °F (60-71°C) for 2-4 hours, Nylene® PA6 should be dried to less than 0.15% moisture for optimum performance. Drying longer than 4 hours or at higher temperatures may cause oxidation of the polymer or remove essential volatiles.
Disclaimer
ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Manufactured in Arnprior, ON
NYLENE USA
1421 Hwy 136 West
Henderson, Kentucky 42420
| Phone: | 270-826-7641 |
| Toll-free: | 800-626-7050 |
NYLENE CANADA ULC.
200 McNab Street
Arnprior, Ontario K7S 3P2
| Phone: | 613-623-3191 |
| Toll-free: | 800-267-7394 |
NYLENE USA
1421 Hwy 136 West
Henderson, Kentucky 42420
| Phone: | 270-826-7641 |
| Toll-free: | 800-626-7050 |
NYLENE CANADA ULC.
200 McNab Street
Arnprior, Ontario K7S 3P2
| Phone: | 613-623-3191 |
| Toll-free: | 800-267-7394 |
ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Manufactured in Arnprior, ON
TDS Ref ID: 794 | Updated: 15/09/2025
Web: www.nylene.com | Email: info@nylene.com
| Resin Type: |
|
| Description: |
|
| Manufacturing Specs | Unit | MIN | MAX | Test Method |
|---|---|---|---|---|
| Copper Content | (ppm) | 35 | 2-7 | |
| Methanol Extractables | (%) | 3.0 | 5.0 | 2-2 |
| Moisture Content | (%) | 0 | 0.15 | 1-3 |
| Relative Viscosity | Unitless, FAV (1) | 45 | 52 | Calculated |
| Relative Viscosity | Unitless, Rv (2) | 2.55 | 2.75 | 2-3 |
| Notes: |
|
| Zone | °F (C°) |
|---|---|
| Zone 1 | 440-475 (227-246) |
| Zone 2 | 440-475 (227-246) |
| Zone 3 | 440-475 (227-246) |
| Zone 4 | 440-475 (227-246) |
| Zone 5 | 495-540 (257-282) |
| Delivery | °F (C°) |
|---|---|
| Flange | 495-540 (257-282) |
| Crosshead | 495-540 (257-282) |
| Die | 495-540 (257-282) |
DRYING TEMPERATURE:
140-160 °F (60-71°C) for 2-4 hours, Nylene® PA6 should be dried to less than 0.15% moisture for optimum performance. Drying longer than 4 hours or at higher temperatures may cause oxidation of the polymer or remove essential volatiles.
Fillers/Reinforcements:
Approvals & Recognition:
Automotive Colors:
Disclaimer