Technical Data Sheet

Preparing your data sheet file...

Please check your downloads after the page refreshes.

Preparing your data sheet file...

Please check your downloads after the page refreshes.

Download PDF
Download PDF
Send Inquiry

NYLENE USA

1421 Hwy 136 West

Henderson, Kentucky 42420

Phone:270-826-7641
Toll-free:800-626-7050

NYLENE CANADA ULC.

200 McNab Street

Arnprior, Ontario K7S 3P2

Phone:613-623-3191
Toll-free:800-267-7394

ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities

Product is manufactured in  Arnprior, ON

Web: www.nylene.com  | Email: info@nylene.com

TDS Ref ID: 68799
Date Updated July 30, 2024

  • Nylene® BX3WQ662X-01
  • Technical Data Sheet
Resin Type:
  • Nylon 6
Description:                 
  • Nylene® BX3WQ662X-01 is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions.
  • Meets the requirements of UL 83 for wire jacketing.
  • This product possesses higher extractables for a balance of performance properties.
  • Shields PVC from impact, damage and general deterioration.
  • Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion.
  • Heat Stabilized for continuous use temperature to 250F (121C).
  • Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.
Manufacturing Specs Unit MIN MAX Test Method
Copper Content (ppm) 35.0 2-7
Methanol Extractables (%) 5.50 7.00 2-2
Moisture Content (%) 0.2 1-3
Relative Viscosity Unitless, FAV(1) 41.0 47.5 Calculated
Relative Viscosity Unitless, Rv(2) 2.55 2.75 2-3
Notes:
  • 1 – 90% Formic Acid @ 25°C
  • 2 – 96% Sulphuric Acid @ 20°C

Recommended Processing Considerations: PA6 Wire & Cable Extrusion

Zone°F (C°)
Zone 1
440-475 (227-246)
Zone 2440-475 (227-246)
Zone 3
440-475 (227-246)
Zone 4
440-475 (227-246)
Zone 5
495-540 (257-282)
Delivery°F (C°)
Flange
495-540 ([flange_min_max_c])
Crosshead495-540 ([crosshead_min_max_c])
Die
495-540 (257-282)

DRYING TEMPERATURE:
140-160 °F (60-71°C) for 2-4 hours, Nylene® PA6 should be dried to less than 0.15% moisture for optimum performance. Drying longer than 4 hours or at higher temperatures may cause oxidation of the polymer or remove essential volatiles.

scott.kuehl@nylene.com

Fillers/Reinforcements:

    Approvals & Recognition:

    • UL 83: UL listed and meeting the requirements of UL 83 for wire jacketing.
    • QMTT2: Polymeric material qualified as QMTT2 for use in wire and cable

    Automotive Colors:

    Disclaimer

    Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.

    Call Us

    Nylene USA 800-626-7050
    Nylene Canada 800-267-7394
    Corporate Office 973-694-3549
    CloseMenu

    Product Inquiry

    Quote Request

    Please provide your contact information and your requirements for a Quote or Sample. Alternatively, you can call us at 1-800-626-7050.

    Sample Request

    Please provide us with your requirements or any information on the material you would like to replace. To speak to a representative about your application, please call 1-800-626-7050.

    Product Stewardship & Safety Data Sheet Request

    Please fill out the form below to request safety, compliance, approvals, and certification documents. This will ensure that we provide you with the information that meets your needs and conforms to regional legislation requirements. We send up-to-date SDS via email.

    Contact Sales & Technical Service
    You may also call US: 1-800-626-7050 (Canada: 1-800-267-7394 x200) for media inquiries.