ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Product is manufactured in Henderson, KY
Web: www.nylene.com | Email: email@example.com
TDS Ref ID: 1222 This information was updated on October 3, 2023
Technical Data Sheet
High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light
The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black
With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion
Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die. (Available in black only)
Notched Izod @ 23°C
Heat Deflection @ 264 psi (1.8 MPa)
Testing conducted on dry-as-molded specimens at 73°F (22.8°C}
Approvals & Recognition:
Nylene does not guarantee the accuracy of this information or the suitability of this product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate tooling.
Nylene USA and Nylene Canada ULC are subsidiaries of the Polymeric Resources Corporation (PRC). Nylene companies develop and manufacture specialty nylons and engineering thermoplastics.