TDS Ref ID: 1510
Product is manufactured in Henderson, KY
Web: www.nylene.com | Email: info@nylene.com
| Properties | ASTM/ISO Procedure | Unit | English | SI | |
|---|---|---|---|---|---|
| Physical | |||||
| Specific Gravity | D792 | n/a | 1.11 | 1 | |
| Relative Viscosity | D789 Formic Acid | n/a | 55 | ||
| Water Absorption | D570 | % | 1.6 | ||
| Mechanical | |||||
| Tensile Strength @ Yield | D638 | psi (MPa) | 9427 | 65 | |
| Flexural Modulus | D790 | psi (MPa) | 319000 | 2,200 | |
| Elongation | D638 | % | 250 | ||
| Notched Izod @ 23°C | D256 | ft-lb/in (J/m) | 1.1 | 60 | |
| Thermal | |||||
| Melt Point | D3418 | °F (°C) | 374 | 190 | |
| Notes: |
Testing conducted on dry-as-molded specimens at 73°F (22.8°C} |
|---|
Disclaimer
ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Manufactured in Henderson, KY
NYLENE USA
1421 Hwy 136 West
Henderson, Kentucky 42420
| Phone: | 270-826-7641 |
| Toll-free: | 800-626-7050 |
NYLENE CANADA ULC.
200 McNab Street
Arnprior, Ontario K7S 3P2
| Phone: | 613-623-3191 |
| Toll-free: | 800-267-7394 |
NYLENE USA
1421 Hwy 136 West
Henderson, Kentucky 42420
| Phone: | 270-826-7641 |
| Toll-free: | 800-626-7050 |
NYLENE CANADA ULC.
200 McNab Street
Arnprior, Ontario K7S 3P2
| Phone: | 613-623-3191 |
| Toll-free: | 800-267-7394 |
ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities
Manufactured in Henderson, KY
TDS Ref ID: 1510 | Updated: 12/12/2023
Web: www.nylene.com | Email: info@nylene.com
| Resin Type: |
|
| Description: |
|
| Properties | ASTM/ISO Procedure | Unit | English | SI | |
|---|---|---|---|---|---|
| Physical | |||||
| Specific Gravity | D792 | n/a | 1.11 | 1 | |
| Relative Viscosity | D789 Formic Acid | n/a | 55 | ||
| Water Absorption | D570 | % | 1.6 | ||
| Mechanical | |||||
| Tensile Strength @ Yield | D638 | psi (MPa) | 9427 | 65 | |
| Flexural Modulus | D790 | psi (MPa) | 319000 | 2,200 | |
| Elongation | D638 | % | 250 | ||
| Notched Izod @ 23°C | D256 | ft-lb/in (J/m) | 1.1 | 60 | |
| Thermal | |||||
| Melt Point | D3418 | °F (°C) | 374 | 190 | |
| Notes: | Testing conducted on dry-as-molded specimens at 73°F (22.8°C} |
Fillers/Reinforcements:
Approvals & Recognition:
Automotive Colors:
Disclaimer