Nylene 894

Rotational Molding Engineered, Heat Stabilized, Nylon 6 Compound

Nylene CX3395

Nylene CX3395 is a high RV nylon 6,69 copolymer suitable for both blown and cast film co-extrusion. CX3395 has a lower melt point and is less crystalline than standard nylon 6 resins. In addition to it’s excellent film application properties, CX3395 exhibits superior deep-drawing characteristics.

Nylene 894 IM

Nylon 6/69 copolymer specially formulated for the ROTOMOLDING process. For uses where HIGH IMPACT properties are required. Heat stabilized for protection against elevated temperatures. Resistant to gasoline permeation. Chemical resistant to aromatic solvents. Permits a single-step process and a single layer material fuel tank.

Nylene PAC990-140U

Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

Nylene PAC990-55

Lower melt point compared to nylon 6 = lower processing temperatures Improved ductility Better impact Lower crystallinity material can produce near clear parts at less than 1.5 mm thickness

Nylene PAC900-140U

Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures. Effective processing is achieved with extruder and die temperatures in the range of 450 – 525 °F (232°C – 274°C) but may be processed as low as 420 °F (216 °C). Nylene PAC900-140U advantages include high elongation, good clarity and flexibility, and lower processing temperatures.

Nylene PAC900-120UNL

Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

Nylene CP41321U

Nylene® CP41321U is a nylon copolymer. Nylene CP41321U has many of the properties desirable in nylon such as toughness, chemical resistance and strength coupled with the advantages of a copolymer.   These advantages include high elongation, good clarity and flexibility, and lower processing temperatures. CP41321U is unextracted, utilizing the monomer as a plasticizer for increased flexibility.

Nylene CX3492

Nylene® CX3492 is a high viscosity, plasticized, nylon 6/69. Nylene® CX3492 was designed for extrusion applications especially monofilament.

United-states_flag_icon_round.svg Nylene USA
Corporate HQ/Facility
Kentucky Facility
canada-svgrepo-com.svg Nylene Canada
Ontario Facility
Canada Sales Office
International Flag Icon Round International
South America
China
Malaysia
Europe/Middle East
Skip to content