PA 6/6 Injection Molding – 20%-40% Mineral Reinforced - Nylene Specialty Nylon

PA 6/6 Injection Molding – 20%-40% Mineral Reinforced

More Processing Considerations

33% Glass Reinforced, Nylon 6/6

High Viscosity Extrusion

Impact Modified Extrusion

Low Viscosity Extrusion

Med Viscosity Extrusion

PA 12 Injection Molding

PA 6 High Viscosity Extrusion

PA 6 Injection Molding Glass Reinforced 23%-25%

PA 6/12 Injection Molding

PA 6/12 Specialty Nylon

PA 6/6 Fast Molding – High Impact Injection Molding

PA 6/6 Injection Molding – 20%-40% Mineral Reinforced

PA 6/6 Injection Molding – 40% Mineral Reinforced

PA 6/6 Injection Molding – Glass Reinforced 15% – 50%

PA 6/6,6 Injection Molding

PA 6/69 Extrusion

PA6 Injection Molding – Glass Reinforced < 15%

PA6 Injection Molding – Glass Reinforced >15%

PA6 Injection Molding – Impact Modified

PA6 Injection Molding – Unreinforced

PA6 MoS2 Lubricated/Target Amine Group Injection Molding

PA6 Rotational Molding

PA6 Wire & Cable Extrusion

PA6/6 Injection Molding – Glass Reinforced <15%

PA6/6 Injection Molding – Glass Reinforced >15%

PA6/6 Injection Molding – Impact Modified

PA6/6 Injection Molding – Unreinforced

Plasticized Extrusion

Rotational Molding Copolymer

Very High Impact Resistance

Very High Viscosity Copolymer Extrusion

Very High Viscosity Extrusion

No results found.

Processing Considerations for PA 6/6 Injection Molding – 20%-40% Mineral Reinforced

Recommended Processing Considerations: PA 6/6 Injection Molding - 20%-40% Mineral Reinforced

Drying Temperature	180°F (82°C)
Drying Time	2-4 hrs. max.
Maximum Moisture	0.002%
Rear	480-540°F (249-282°C)
Middle	520-560°F (271-293°C)
Front	520-560°F (271-293°C)
Nozzel	520-560°F (271-293°C)
Melt Temperature	520-540°F (271-282)°C)
Mold Temperature	80-160°F (27-71°C)
Back Pressure	50 to 100 psi

Products

Nylene 51GR35

35% Glass Reinforced, Nylon 6/6

Nylene 51GR35HHS

35% Glass Reinforced, Heat Stabilized, Hydrolysis Resistant, Nylon 6/6

Nylene 51GR35HS

35% Glass Reinforced, Heat Stabilized, Nylon 6/6

Nylene 51GR20

20% Glass Reinforced, Nylon 6/6

Nylene 51GR25

25% Glass Reinforced, Nylon 6/6

Nylene 51GR25HS

25% Glass Reinforced, Heat Stabilized, Nylon 6/6

Nylene 51GR30

30% Glass Reinforced, Nylon 6/6

Nylene 51GR30HS

30% Glass Reinforced, Heat Stabilized, Nylon 6/6

Nylene 51EGMR1525 BK

40% Glass & Mineral Reinforced, Economy Grade, Pre-Colored Black, Nylon 6/6

Nylene 51EGMR2515HS BK

40% Glass & Mineral Reinforced, Heat Stabilized, Nylon 6/6

Nylene 51EGR30HS BK

30% Glass Reinforced, Heat Stabilized, Pre-Colored Black, Economy Grade, Nylon 6/6

Nylene 51EGR33 BK

33% Glass Reinforced, Pre-Colored Black, Economy Grade, Nylon 6/6

Nylene 51EGR33HS BK

33% Glass Reinforced, Heat Stabilized, Pre-Colored Black, Economy Grade, Nylon 6/6

Nylene 51GMR2515

40% Glass & Mineral Reinforced, Nylon 6/6

About Nylene

Nylene USA and Nylene Canada ULC are subsidiaries of the Polymeric Resources Corporation (PRC). Nylene companies develop and manufacture specialty nylons and engineering thermoplastics.

Company

Resources

Legal